Iwata RG3L-12 0.6mm Round Pattern Spray Gun w/ PC61 130mL Cup (2870)

The Iwata RG3L-12 0.6mm Round Pattern Spray Gun w/ PC61 130mL Cup (2870) is a high-precision air-spray gun engineered for delicate and detailed finishing work. This compact and lightweight tool is designed to provide exceptional control and remarkable atomization, making it an indispensable asset for tasks requiring fine blending, shading, and intricate designs. Its efficient air consumption allows for effective operation even with smaller air compressors, offering versatility and convenience. The unique design of the side-mounted gravity cup ensures maximum flexibility, allowing artists and professionals to maneuver the gun at various angles without compromising performance. From automotive touch-ups and model painting to fine art and craft projects, the Iwata RG3L-12 delivers consistent, high-quality results.

KEY FEATURES AND BENEFITS:

• Precise Round Pattern Control: The 0.6mm nozzle is specifically designed to produce a focused round spray pattern, providing exact control essential for tasks like blending, shading, and detailed spot repairs.
• Remarkable Atomization: Engineered to break down paint into extremely fine particles, ensuring a smooth, even, and high-quality finish with minimal overspray.
• Low Air Consumption: Operates efficiently with just 1.1 cfm of air at 36 psi, making it compatible with a wide range of air compressors, including smaller, more portable units.
• Compact and Lightweight Design: At approximately 200g, its ergonomic and light build reduces user fatigue, allowing for extended periods of comfortable operation and enhanced maneuverability.
• 360° Rotatable Side-Mounted Cup: The included PC61 130mL gravity cup can be rotated a full 360 degrees, offering unparalleled flexibility to spray at virtually any angle, crucial for reaching difficult areas.
• Ideal for Blending and Shading: Specifically excels in applications where precise color transitions and subtle layering are required, common in automotive refinishing and artistic endeavors.

SPECIFICATIONS:

• Nozzle Size: 0.6mm
• Cup Capacity: 130mL (PC61)
• Air Consumption: 1.1 cfm at 36 psi (2.5 bar)
• Fluid Output: 35 ml/min
• Pattern Width: 35 mm
• Weight: 200g
• Feed Style: Gravity-feed
• Product Code: 2870
• Included in purchase: Iwata RG3L-12 0.6mm Spray Gun, PC61 130mL Cup

HOW TO USE:

1. Preparation: Ensure your work area is well-ventilated and that you are wearing appropriate personal protective equipment (respirator, gloves, eye protection). Clean the spray gun thoroughly before its first use and between color changes.
2. Mix Paint: Prepare your paint according to the manufacturer's recommendations for viscosity. Strain the paint to prevent clogs in the gun.
3. Fill Cup: Securely attach the PC61 130mL gravity cup to the side of the spray gun. Pour the prepared paint into the cup, ensuring it does not exceed the cup's capacity.
4. Adjust Cup Position: Rotate the side-mounted cup to the desired angle that best suits your spraying position and the geometry of your workpiece.
5. Connect Air Hose: Attach your air compressor's hose to the air inlet of the spray gun. Set your air compressor to the recommended operating pressure of 36 psi.
6. Test Spray: Before applying to your actual workpiece, perform a test spray on a piece of scrap material to check the spray pattern and atomization. Adjust paint flow and air pressure if needed.
7. Apply Paint: Hold the gun perpendicular to the surface, maintaining a consistent distance. Trigger the gun fully and move your arm at a steady pace to apply an even coat. Overlap each pass by approximately 50% for consistent coverage.
8. Clean Up: Immediately after use, empty any remaining paint from the cup. Disassemble the gun components (cup, air cap, nozzle, needle) and thoroughly clean them with appropriate cleaning solvents. Reassemble after cleaning.

BENEFITS OF USING IWATA RG3L-12 0.6MM ROUND PATTERN SPRAY GUN W/ PC61 130ML CUP (2870):

• Achieves professional-grade finishes for small areas and detailed tasks.
• Significantly reduces paint waste due to precise control and efficient atomization.
• Enhances user comfort and reduces hand strain during prolonged use.
• Offers exceptional flexibility for spraying in tight spaces and awkward angles.
• Minimizes the need for large, powerful air compressors, saving energy and space.
• Delivers consistent, high-quality results for a wide array of applications.

FEATURES:

• Ergonomic lightweight aluminum die-cast body construction.
• Precision-machined stainless steel fluid nozzle and needle.
• Fine adjustment knobs for precise control over fluid output and air pressure.
• Responsive trigger mechanism for smooth and immediate paint flow.
• Robust brass air cap for consistent and durable spray performance.
• Quick-release cup attachment for easy filling and cleaning.
• Designed for low overspray and high transfer efficiency.