Iwata LPH300-124LV 1.2mm Spray Gun w/ PCG600P-2 Cup (3943)

The Iwata LPH300-124LV 1.2mm Spray Gun w/ PCG600P-2 Cup (3943) is a compact, center post gravity feed HVLP (High Volume Low Pressure) spray gun engineered for precise and efficient material application. Designed to deliver full-size performance in a smaller, lighter package, this tool helps reduce painter fatigue during extended use. Utilizing Iwata's LV technology and a unique tulip-inspired spray pattern, the LPH300-LV offers versatility for a wide array of painting applications, including spot repair, light industrial tasks, hobby projects, woodworking, and metal finishing. The included PCG600P-2 600mL plastic gravity cup provides a convenient and adequate capacity for various materials.

KEY FEATURES AND BENEFITS:

• Compact Size and Lightweight Design: The smaller dimensions and reduced weight contribute to improved comfort and less fatigue, allowing for longer, more productive spraying sessions.
• HVLP Technology: This design principle ensures high transfer efficiency, which means more material reaches the surface and less is wasted as overspray. This leads to material savings and a cleaner work environment.
• LV Technology Integration: Iwata's proprietary LV technology enhances fine atomization and material transfer, contributing to a smoother, more uniform finish with consistent coverage.
• Tulip-Inspired Spray Pattern: This distinct spray pattern provides flexibility and allows the gun to be used effectively across a broad range of applications, adapting to different shapes and sizes of surfaces.
• Optimized for Various Materials: Capable of handling a wide selection of coatings, making it suitable for automotive refinish, industrial coatings, and fine finishing materials.

SPECIFICATIONS:

• Nozzle Size: 1.2 mm
• Pattern Width: 8.0 inches
• PSI: 15
• CFM: 7.1
• Included in product when purchased: LPH300-124LV Spray Gun, PCG600P-2 600mL Plastic Gravity Cup

HOW TO USE:

1. Prepare the Surface: Ensure the surface to be painted is clean, dry, and properly prepared according to the material manufacturer's instructions.
2. Mix Material: Prepare your paint or coating material according to the manufacturer's specifications. Filter the material to remove any impurities that could clog the gun.
3. Fill the Cup: Pour the prepared material into the PCG600P-2 600mL gravity cup. Securely attach the cup to the spray gun.
4. Connect Air Supply: Connect an air hose from your air compressor to the air inlet on the spray gun. Ensure your air compressor is capable of providing the required CFM and PSI.
5. Adjust Settings: Set the air pressure at the gun inlet to 15 PSI. Adjust the fluid control knob and pattern width control knob as needed for your specific material and desired spray pattern. Test the spray pattern on a piece of scrap material to fine-tune adjustments.
6. Apply Material: Hold the spray gun at a consistent distance from the surface (typically 6-8 inches) and move it in smooth, even passes. Overlap each pass by about 50% to ensure even coverage.
7. Clean After Use: After completing your painting task, immediately clean the spray gun thoroughly following the material manufacturer's recommendations. Disassemble the air cap and fluid nozzle for detailed cleaning.

BENEFITS OF USING IWATA LPH300-124LV 1.2MM SPRAY GUN W/ PCG600P-2 CUP (3943):

• Reduced Material Waste: High transfer efficiency means less paint is lost to overspray, resulting in cost savings.
• Consistent Application: The refined atomization and pattern control provide a smooth, uniform finish with minimal effort.
• Versatile Use: Effectively handles a range of materials and applications, from intricate spot repairs to general finishing tasks.
• Operator Comfort: Its lighter build and balanced design contribute to reduced strain, especially during prolonged painting sessions.
• Reliable Performance: Iwata's engineering ensures consistent performance and durability for demanding professional and hobby use.

FEATURES:

• Designed for gravity feed operation.
• Utilizes a central post cup attachment for balance.
• Engineered for high volume, low pressure air delivery.
• Features a precisely machined 1.2mm fluid nozzle.
• Equipped with controls for fluid, air, and pattern adjustments.
• Suitable for precise material placement in targeted areas.
• Constructed to be compatible with a variety of coating types.
• Includes a 600mL plastic material reservoir.