Iwata LPH440-201 2.0mm HVLP Primer Spray Gun Only (5735)

The Iwata LPH440-201 2.0mm HVLP Primer Spray Gun Only (5735) is engineered for the precise and efficient application of primers, sealers, and fillers. This spray gun is designed to meet the demands of professional finishing, offering a combination of performance and material efficiency. Its core strength lies in its ability to produce a fine, soft atomization that ensures an even film build, which is crucial for achieving a smooth, consistent base layer. The distinctive sharp-edged spray pattern of the LPH440-201 contributes significantly to its efficiency. This focused pattern optimizes overlap during spraying, allowing for faster coverage and increased working speed, thereby reducing overall project time. Furthermore, the HVLP technology minimizes overspray, leading to less material waste and a cleaner work environment. This not only makes the application process more economical but also reduces the amount of masking required. The thoughtful design of the Iwata LPH440-201 also helps in saving significant sanding time, as the consistent and even application of material reduces the need for extensive post-spray preparation. This product is a reliable choice for anyone looking to improve the quality and speed of their priming and filling operations.

KEY FEATURES AND BENEFITS:

• Optimized for Primers, Sealers, and Fillers: Specifically designed to handle the viscosity and application requirements of these materials, ensuring consistent flow and atomization.
• HVLP Atomization Technology: Provides high transfer efficiency, reducing material waste and minimizing overspray, leading to cost savings and a cleaner workspace.
• Sharp-Edged Spray Pattern: Creates a focused and precise pattern, allowing for optimal overlap between passes, which increases application speed and reduces the need for extensive masking.
• Fine, Soft Atomization: Delivers an even film build, contributing to a smoother finish that requires less post-application sanding, thus saving time and effort.
• Increased Working Speed: The combination of precise pattern and efficient material delivery allows for faster application and quicker project completion.

SPECIFICATIONS:

• Nozzle Size: 2.0 mm (0.078")
• Max Working Air Inlet Pressure: 98 PSI
• Air Inlet Size: 1/4"
• Gun Type: Manual
• Pattern Width: 280 mm (11.0")
• What is included: Iwata 5735 LPH440-201 Spray Gun Only

HOW TO USE:

1. Preparation: Ensure your primer, sealer, or filler material is properly mixed and strained according to the manufacturer's instructions.
2. Connect Air Supply: Attach a clean air hose to the 1/4" air inlet of the spray gun. Set your air compressor regulator to the recommended working pressure for the specific material you are spraying, typically lower than the gun's maximum.
3. Fill Material Cup (if applicable): If using a separate material cup, securely attach it to the gun and fill it with your prepared material.
4. Adjust Settings: Adjust the fluid control knob to regulate the amount of material flow and the fan pattern control knob to achieve your desired spray pattern width.
5. Test Spray: Before applying to your workpiece, test the spray pattern on a piece of scrap material to ensure proper atomization and pattern shape. Make any fine adjustments as needed.
6. Application: Hold the spray gun perpendicular to the surface at a consistent distance, typically 6-8 inches. Trigger the gun fully before beginning your pass and release at the end of the pass. Overlap each pass by approximately 50% for even coverage, utilizing the gun's sharp-edged pattern.
7. Cleaning: Immediately after use, clean the spray gun thoroughly according to the material manufacturer's recommendations. This typically involves flushing with appropriate cleaning solvents until clear.

BENEFITS OF USING IWATA LPH440-201 2.0MM HVLP PRIMER SPRAY GUN ONLY (5735):

• Enhanced finishing quality: Achieves superior base coats due to consistent material application and fine atomization.
• Material economy: HVLP design significantly reduces paint waste, leading to cost savings over time.
• Time efficiency: Faster application and reduced post-spray work contribute to shorter project durations.
• Reduced rework: The precise spray pattern minimizes common application errors, leading to fewer touch-ups.
• Professional results: Consistently delivers high-quality, smooth surfaces essential for subsequent topcoat applications.

FEATURES:

• Equipped with a specialized air cap designed for viscous coatings.
• Ergonomic design for comfortable handling during extended use.
• Adjustable fluid and fan controls for precise application tuning.
• Corrosion-resistant components for extended service life.
• Lightweight construction for reduced user fatigue.