Phoenix USA Fender Flare Right Rear (7415000003R)

The Phoenix USA Fender Flare Right Rear (7415000003R) is a specifically designed component intended for the right rear side of vehicles equipped with a Jerr-Dan steel body wrecker, primarily models from 1993 onwards. This fender flare is also reported to be compatible with Challenger 4700 and Holmes wrecker bodies. Its primary function is to provide essential coverage for the rear tire, significantly reducing the spray of water, mud, and other road debris, thereby protecting both the host vehicle and any vehicle being towed. Constructed from durable fiberglass, this fender flare offers a robust yet lightweight solution that is ready for customization with a primer finish, allowing it to be painted to perfectly match the vehicle's aesthetic.

KEY FEATURES AND BENEFITS:

• Vehicle Protection: Effectively shields the vehicle's body and undercarriage from mud, rocks, salt, and other road debris, helping to prevent damage and corrosion.
• Enhanced Coverage: The 4-inch extra wide lip provides superior protection against road spray and debris, keeping adjacent vehicles and pedestrians cleaner.
• Direct Fit for Jerr-Dan: Specifically designed for seamless integration with Jerr-Dan towing equipment, ensuring proper alignment and a factory-like appearance.
• Durable Construction: Made from high-quality fiberglass, offering a balance of strength and flexibility to withstand impacts and environmental conditions.
• Easy Identification: Multiple part numbers (7415000003R, 7415000018, RBF-JW/93R) simplify the identification and ordering process.
• Improved Aesthetics: Contributes to the overall appearance of the vehicle, providing a finished and professional look.

SPECIFICATIONS:

• Part Number: 7415000003R
• Position: Right Rear
• Compatibility: Primarily 93+ Jerr-Dan steel body wreckers; also reported for Challenger 4700 and Holmes wrecker bodies.
• Lip Width: 4 inches (Extra Wide)
• Material: Fiberglass
• Finish: Primed (Ready to Paint)
• Approximate Dimensions (Individual Flare): Width: Approximately 8 inches, Height: Approximately 22 inches
• Approximate Weight (Individual Flare): Around 2 lbs.
• Alternate Part Numbers: 7415000018, RBF-JW/93R

HOW TO USE:

• Preparation: Ensure the area on the vehicle's right rear fender where the flare will be mounted is clean and free of any dirt, grease, or debris.
• Positioning: Carefully position the Phoenix USA Fender Flare Right Rear (7415000003R) against the vehicle's fender, ensuring it aligns correctly with the body lines and provides the desired tire coverage.
• Marking (If Necessary): If the flare does not have pre-drilled holes or if adjustments are needed, use a marker to indicate the desired mounting points on both the flare and the vehicle's fender.
• Drilling (If Necessary): If marked, carefully drill pilot holes through both the fender flare and the vehicle's fender at the marked locations.
• Mounting: Secure the fender flare to the vehicle using appropriate fasteners (screws, bolts, or rivets). Ensure the flare is firmly attached and sits flush against the fender.
• Painting (Optional): If desired, paint the primed fender flare to match the color of your vehicle using automotive-grade paint.

BENEFITS OF USING THE PHOENIX USA FENDER FLARE RIGHT REAR (7415000003R):

• Maintained Vehicle Condition: By effectively deflecting road spray and debris, the fender flare helps preserve the paint finish and structural integrity of your Jerr-Dan truck.
• Enhanced Safety: Minimizing the spray of water and debris can improve visibility for both the driver and surrounding traffic, contributing to safer operating conditions.
• Professional Image: The addition of a properly fitted fender flare provides a more complete and professional appearance to your towing equipment.
• Regulatory Compliance: Helps ensure compliance with local regulations regarding vehicle modifications.
• Long-Term Cost Savings: Protecting your vehicle from damage and corrosion can result in lower long-term maintenance and repair costs.

FEATURES:

• Extended 4-Inch Wide Lip: Provides maximum splash and debris containment.
• Fiberglass Material: Offers a strong yet flexible build that resists impacts.
• Contoured Design: Specifically shaped for the right rear of compatible wrecker bodies.
• Primer Coating: Ready to accept automotive paint for seamless color matching.
• Straightforward Installation: Designed for minimal downtime during installation.
• Contributes to Vehicle Cleanliness: Reduces road grime accumulation on the vehicle.
• Aids in Meeting Legal Requirements: Ensures proper tire coverage for compliance.
• Lightweight Construction: Does not add excessive bulk to the vehicle.
• Resistance to Corrosion: Inherent in fiberglass materials, enhancing durability.
• Enhances Overall Appearance: Provides a more finished and professional look to the vehicle.