American Forge & Foundry 3-Ton Aluminum Floor Jack (210)

The American Forge & Foundry 3-Ton Aluminum Floor Jack (210) is engineered for the demands of professional service technicians. This heavy-duty floor jack is built to perform consistently in busy shops and during roadside service calls, offering a blend of strength, speed, and easy portability. Its construction features a lightweight anodized aluminum frame, making it simple to transport and position, yet robust enough for daily rigorous use. The core of its efficiency lies in the twin hydraulic system, which incorporates double pumper technology for exceptionally fast and effective lifting, significantly reducing the time spent on vehicle elevation. Designed for a broad range of vehicles, from low-clearance sports cars to various SUVs and light trucks, the Model 210 provides a secure and reliable lifting solution.

KEY FEATURES AND BENEFITS:

• 3-Ton Lifting Capacity: Safely lifts up to 6,000 pounds, accommodating a wide variety of passenger vehicles, light trucks, and SUVs for comprehensive service.
• Lightweight Anodized Aluminum Frame: Offers easy portability and maneuverability, making it an ideal choice for both stationary shop use and mobile roadside assistance, without compromising on strength.
• Twin Hydraulic System with Double Pump Design: Provides rapid and efficient vehicle lifting, accelerating workflow and saving valuable time for technicians.
• Low-Profile Access: With a minimum height of just 3.75 inches, it can easily slide under vehicles with very low ground clearance.
• High Lift Range: Achieves a maximum lifting height of 19.5 inches, providing ample working space for various undercarriage maintenance and repair tasks.
• Enhanced Durability: Features polished plunger pistons for extended seal life and wiper seals to prevent dirt contamination, ensuring the longevity and reliability of the hydraulic system.
• Safety Standard Compliance: Meets the stringent ASME PASE 2019 Safety Standard, guaranteeing a secure and compliant tool for professional use.

SPECIFICATIONS:

• Capacity: 3 Tons (6,000 lbs)
• Duty Level: Heavy Duty
• Low Height: 3.75 inches
• High Height: 19.5 inches
• Chassis Length: 26 inches
• Chassis Width - Front: 11.5 inches
• Chassis Width - Rear: 13.5 inches
• Handle Length: 47.64 inches
• Number of Handle Pieces: 2
• Saddle Diameter: 4.57 inches
• Operation: Manual, Hydraulic
• Type: Floor Jack
• Weight: 58 lbs
• Standards: ASME PASE 2019 Safety Standard

HOW TO USE:

1. Preparation: Ensure the vehicle is on a hard, level surface. Engage the parking brake and place wheel chocks on the wheels that will remain on the ground.
2. Positioning the Jack: Locate the vehicle's manufacturer-recommended lift points. Slide the AFF 3-Ton Aluminum Floor Jack (Model 210) under the designated lift point using the side handles, ensuring the padded saddle is centered and securely positioned.
3. Lifting the Vehicle: Insert the handle into the pump mechanism. Pump the handle steadily to raise the saddle. The double pump design will lift the vehicle quickly. Continue pumping until the vehicle is at the desired height.
4. Securing the Vehicle: Once the vehicle is lifted, always place sturdy jack stands under the vehicle's designated support points. Lower the vehicle slowly onto the jack stands using the release valve on the jack handle.
5. Removing the Jack: After the vehicle is securely supported by jack stands, fully lower the floor jack by turning the release valve completely counter-clockwise. Once lowered, pull the jack out from under the vehicle.
6. Lowering the Vehicle from Jack Stands: When ready to lower the vehicle back to the ground, carefully lift the vehicle slightly with the floor jack to remove the jack stands. Once the jack stands are removed, slowly turn the release valve on the jack handle to lower the vehicle safely back to the ground.

BENEFITS OF USING AMERICAN FORGE & FOUNDRY 3-TON ALUMINUM FLOOR JACK (210):

• Increased Efficiency: The double pump system significantly speeds up the lifting process, allowing technicians to move through tasks more quickly.
• Versatile Application: Its high capacity and low-profile design make it suitable for a diverse range of vehicles, from compact cars to heavier SUVs.
• Reduced Physical Strain: The lightweight aluminum construction makes it easier to position and move around the shop or job site compared to heavier steel jacks.
• Enhanced Vehicle Protection: The padded saddle helps prevent damage to the vehicle's frame and undercarriage during lifting.
• Long-Term Reliability: Features like polished pistons and wiper seals are designed to protect the hydraulic system, ensuring a longer product lifespan and consistent performance.
• Professional Trust: Built to ASME PASE 2019 standards, this jack provides the safety and reliability that professional technicians require and trust.

FEATURES:

• Professional-grade construction for demanding shop environments.
• Aluminum frame reduces overall tool weight for effortless transport.
• Hydraulic twin system for quick, smooth elevation.
• Padded two-piece handle for comfortable operation and compact storage.
• Saddle engineered with protective padding for vehicle contact points.
• Equipped with front wheels for easy rolling maneuverability.
• Two integrated side handles assist with precise placement.
• Designed to access vehicles with minimal ground clearance.
• High-reach capability for extensive undercarriage access.
• Internal seals designed to resist dirt ingress for cleaner operation.