Iwata WIDER1L-2-14J2S 1.4mm Small Siphon Spray Gun (11025)

The Iwata WIDER1L-2-14J2S 1.4mm Small Siphon Spray Gun (11025) is engineered for precise and efficient paint application across various projects, including wood, furniture, and metals. This High Volume Low Pressure (HVLP) spray gun is designed to provide high transfer efficiency and optimized atomization even at low air pressure, leading to significant paint savings and reduced paint scattering. Its thoughtful design prioritizes user comfort and ease of maintenance, ensuring consistent, professional-grade results every time. The WIDER1L-2-14J2S builds upon the legacy of its predecessors, offering enhanced linearity in pattern adjustment and improved repeatability, making it a reliable tool for professional painters seeking control and efficiency.

KEY FEATURES AND BENEFITS:

• High Transfer Efficiency: Saves 20%-30% paint consumption compared to conventional models, reducing material waste and costs.
• Optimized Atomization: Achieves fine atomization even with lower air pressure, resulting in a smooth, high-quality finish.
• Reduced Paint Scattering: Contributes to a better working environment by minimizing overspray and extending spray booth maintenance periods.
• Ergonomic Design: Features a 5-gram weight reduction, tapered adjustment knobs with deeper grooves for a surer grip, and a smoother trigger for comfortable and controlled operation.
• Simplified Maintenance: Designed for easier upkeep with a quicker-attaching cap (1.5 turns), reshaped needle valve for easier removal, and threadless sections on nipples for straightforward connector attachment.
• Linear Pattern Adjustment: Provides a more intuitive and predictable response to adjustments, allowing for finer control over the spray pattern.
• Consistent Application: Revised air valve seat sets with larger, uniform orifices ensure repeatable air volume and consistent paint output and pattern width regardless of installation.
• Environmental Compliance: Compliant with strict environmental regulations, such as those from the South Coast Air Quality Management District in the USA.

SPECIFICATIONS:

• Model Number: WIDER1L-2-14J2S
• Fluid Nozzle Diameter: 1.4 mm
• Feed Type: Siphon (Suction Feed)
• Spray Gun Type: HVLP (High Volume Low Pressure)
• Atomizing Air Pressure: 0.1 MPa
• Pressure in Air Cap: 0.049 MPa
• Air Consumption: 80 L/min
• Fluid Output: 180 mL/min
• Pattern Width: 200 mm
• Spraying Distance: 200 mm
• Air Nipples: G1/4
• Fluid Nipples: G1/4
• Weight: 290g (based on similar WIDER1L models)

HOW TO USE:

1. Prepare the Surface: Ensure the surface to be painted is clean, dry, and properly prepared (sanded, primed, etc.).
2. Mix Paint: Prepare your paint according to the manufacturer's instructions, ensuring correct viscosity for siphon feed application. Pour the mixed paint into the siphon cup.
3. Attach Cup: Securely attach the siphon cup to the spray gun's fluid inlet.
4. Connect Air Supply: Connect an air hose from your air compressor to the spray gun's air nipple. Set your compressor to the recommended atomizing air pressure (0.1 MPa) for optimal performance.
5. Adjust Settings: Adjust the fluid output and pattern width knobs. For initial setup, try adjusting the pattern to approximately 35% with 1 turn, 50% with 1.5 turns, and 70% with 2 turns for a linear response.
6. Test Spray: Before applying to your main surface, perform a test spray on a piece of scrap material to verify the pattern, atomization, and fluid output.
7. Apply Paint: Hold the gun perpendicular to the surface at the recommended spraying distance (200mm). Begin spraying off the work piece, move across, and release the trigger off the work piece. Overlap each pass by 50%.
8. Clean Up: After use, thoroughly clean the spray gun according to paint and gun manufacturer instructions to prevent clogging and ensure longevity.

BENEFITS OF USING IWATA WIDER1L-2-14J2S 1.4MM SMALL SIPHON SPRAY GUN (11025):

• Achieve a smooth, professional finish on wood, furniture, and metal surfaces.
• Save on paint costs with high transfer efficiency and reduced material waste.
• Minimize environmental impact with compliant, low-overspray performance.
• Enjoy better ergonomics and control for fatigue-free extended use.
• Benefit from easy maintenance and durable build quality for long-term reliability.
• Maintain consistent results with linear pattern adjustment and uniform air output.

FEATURES:

• Reduced weight for comfortable handling.
• Tapered adjustment knobs with deep grooves for a secure grip.
• Bushing integrated into the needle valve spring for smoother paint output.
• Smoother trigger tip for controlled low paint volume application.
• Cap thread pitch of 1.5 mm for quicker attachment.
• Reshaped needle valve end for easier removal and attachment.
• Threadless sections on air and fluid nipples for straightforward connector fitting.
• Newly developed pattern adjustment set offering linear response.
• Revised air valve seat sets with larger, uniform orifices for consistent air volume.
• Compliant with stringent environmental regulations for responsible use.