New Viper Toolbox Setup Guide: How To

New Viper Toolbox Setup Guide: How To

Posted by Emily R. on 5th May 2025

?️ New Toolbox Setup Guide

Congratulations on your new Viper toolbox! Whether it's a rolling cabinet or a stationary top chest, this guide will help you set it up efficiently and safely.

? What's in the Box?

Before diving in, ensure you have all the components:

  • For Rolling Toolboxes:

    • 4 casters (2 swivel, 2 fixed)

    • Hex bolts and washers

    • Side handle

    • Drawer liners (precut or roll)

    • 1 pair of keys

  • For Top Chests:

    • Drawer liners (precut or roll)

    • 1 pair of keys

Step 1: Unboxing & Inspection

  1. Unpack Carefully: Remove all packaging materials. For larger toolboxes on pallets, cut and remove straps, then lift off any protective coverings. Assistance is recommended for heavy items.

  2. Inspect for Damage: Check for any dents, scratches, or missing parts. If you notice any issues, contact Viper Tool Storage customer support before proceeding.

Step 2: Installing Casters (Rolling Toolboxes Only)

  1. Position the Toolbox: Lay it on its back or side on a padded surface to prevent scratches.

  2. Attach Casters:

    • Align each caster with the pre-drilled holes at the bottom corners.

    • Typically, two casters are swivel-style and two are fixed.

    • Insert hex bolts through the holes, securing with washers and nuts.

    • Tighten all bolts securely using a wrench.

  3. Upright the Toolbox: Carefully stand the toolbox upright.

Step 3: Installing the Side Handle (Rolling Toolboxes Only)

  1. Locate Handle Holes: Find the pre-drilled holes on one side of the toolbox.

  2. Attach Handle:

    • Align the handle with the holes.

    • Secure it using the provided bolts and washers.

    • Tighten until snug with a wrench.

Step 4: Placing Drawer Liners

  1. Precut Liners: Simply place them inside each drawer.

  2. Roll Liners:

    • Measure each drawer.

    • Cut the liner to fit.

    • Press down to ensure they stay in place.

✅ Final Checks & Tips

  • Lock Mechanism: Test the lock with the provided keys to ensure it operates smoothly.

  • Caster Locks: If your toolbox has locking casters, engage them to confirm they hold securely.

  • Weight Distribution: Store heavier items in lower drawers to maintain stability.

Your Viper toolbox is now ready for use! For further assistance or questions, feel free to reach out to Viper Tool Storage customer support.

Share
!