-
Description
The FiTech Iron Orange Dot Ford 289/302 .467 I.D. Distributor Gear (99808) is a crucial component designed to ensure accurate and reliable engine timing. As a direct replacement part, this gear facilitates the transfer of rotational motion from your engine's camshaft to the distributor, which in turn controls the firing sequence of the spark plugs. Maintaining proper timing is essential for optimal engine performance, fuel efficiency, and overall longevity. Crafted from durable iron, the FiTech 99808 is built to withstand the demanding conditions within your engine.
KEY FEATURES AND BENEFITS:
- Precise Engine Timing: Ensures the distributor functions correctly, leading to optimal engine performance and efficiency.
- Direct Replacement: Designed to replace the original distributor gear, ensuring a proper fit and function.
- Durable Iron Construction: Offers strength and resistance to wear, contributing to a longer lifespan.
- Identifiable Marking: Features an orange paint dot for easy identification and verification of the correct part.
- Specific Application: Designed for compatibility with specific Ford engines, ensuring proper engagement and operation.
- Cost-Effective Solution: Provides a reliable replacement option to maintain engine health without needing to replace the entire distributor assembly.
SPECIFICATIONS:
- Part Number: 99808
- Part Type: Distributor Gear
- Product Line: FiTech Distributor Gears
- Material: Iron
- Distributor Shaft Diameter: 0.467 inches
- Drilling Required: No
- Roll Pin Included: No
- Quantity: Sold individually
- Notes: Features an orange paint dot.
- Compatibility: Ford 221 CID Engine, Ford 260 CID Engine, Ford 289 CID Engine, Ford 302 CID Engine
HOW TO USE:
- Preparation: Ensure the engine is turned off and the vehicle is safely supported. Disconnect the negative battery cable.
- Locate the Distributor: Identify the distributor on your engine.
- Remove the Distributor Cap: Carefully remove the distributor cap, noting the position of the rotor.
- Disconnect Wiring: Disconnect any wiring connected to the distributor.
- Mark Distributor Position: Before removing the distributor, mark its position relative to the engine block. This will aid in reinstalling it correctly and maintaining timing.
- Remove the Distributor: Loosen the distributor hold-down clamp and carefully remove the distributor from the engine.
- Access the Gear: The distributor gear is located at the base of the distributor shaft. You may need to remove a retaining pin or clip to access it.
- Remove the Old Gear: Carefully remove the old distributor gear. Note its orientation.
- Install the New Gear: Install the new FiTech 99808 distributor gear, ensuring it is oriented correctly as the old gear was.
- Reinstall Retaining Pin/Clip: Secure the new gear with the retaining pin or clip.
- Reinstall the Distributor: Align the distributor with the marks you made earlier and carefully insert it back into the engine. Ensure the rotor is pointing in the correct direction.
- Secure the Distributor: Tighten the distributor hold-down clamp.
- Reconnect Wiring: Reconnect all wiring to the distributor.
- Reinstall the Distributor Cap: Place the distributor cap back on.
- Reconnect Battery: Reconnect the negative battery cable.
- Verify Timing: After installation, it is crucial to check and potentially adjust the engine timing to ensure optimal performance. This often requires specialized tools and knowledge.
BENEFITS OF USING THE FITECH IRON ORANGE DOT FORD 289/302 .467 I.D. DISTRIBUTOR GEAR (99808):
- Restores Proper Engine Timing: Replacing a worn or damaged distributor gear with the FiTech 99808 ensures the distributor operates correctly, leading to optimal combustion and engine performance.
- Maintains Fuel Efficiency: Accurate timing contributes to efficient fuel combustion, potentially improving fuel economy.
- Ensures Smooth Engine Operation: Proper timing helps prevent issues like engine misfires, rough idling, and hesitation.
- Extends Engine Life: Maintaining correct timing reduces stress on engine components, potentially prolonging the engine's lifespan.
- Reliable Performance: The durable iron construction of the FiTech 99808 provides a dependable solution for maintaining your engine's timing.
- Cost-Effective Repair: Replacing just the gear is more economical than replacing the entire distributor assembly when the gear is the primary issue.
FEATURES:
- Specific Ford Engine Design: Engineered to fit and function correctly with Ford 221, 260, 289, and 302 cubic inch engines.
- Orange Identification Dot: A visual marker to easily identify the specific gear type.
- Standard 0.467-inch Shaft Diameter: Matches the required dimensions for compatible distributors.
- Robust Iron Material: Provides the necessary strength and wear resistance for the application.
- Individually Sold: Allows for targeted replacement of the worn component.
-
Customers Also Viewed
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
JB Tools Customer Satisfaction Guarantee: Although JB tools is often not an “authorized” re-seller of all the products it sells and is often not affiliated with the manufacturers or brands of the products it sells, JB Tools stands behind all of the products it sells, because the products JB Tools sells are genuine and authentic. Because JB Tools only sells genuine and authentic products, JB Tools offers its customers a 100% satisfaction guarantee. To ensure 100% customer satisfaction, JB Tools is committed to and strictly complies with its return policy, which offers replacement products to its customers (subject to product availability), or a full refund (less return shipping costs), at the customer’s option, and which you can access by clicking here.
Because JB Tools is an independent re-seller, JB Tools is able to offer the products it sells at the most competitive prices, resulting in substantial cost-savings passed directly to JB Tools’ customers. JB Tools prides itself in being a trusted, internet-based retailer that its customers can rely on for quality products at reasonable prices. JB Tools’ commitment to 100% customer satisfaction is unparalleled, which is why JB Tools offers its customers a best-in-class Warranty Program to all of its customers on all products sold by JB Tools. In the event a JB Tools customer believes that a product purchased from JB Tools has a defective condition and/or malfunctioning issue, JB Tools’ customers can rest assured JB Tools will work with its customers to ensure issues are resolved in accordance with JB Tools’ Warranty Program, which you can access by clicking here.
JB Tools Non-Affiliation Notice and Disclaimer: JB Tools holds itself out as neither the manufacturer, an affiliate of the manufacturer, or an “authorized” distributor of this product. By purchasing this product from JB Tools, purchasers may not be guaranteed any manufacturer-provided services offered by the manufacturer of this product (including any training or technical support that may otherwise be available). By purchasing this product from JB Tools, the manufacturers’ warranty, if any, potentially associated with the product may not be honored by the manufacturer. JB Tools provides this disclaimer to ensure there is no likelihood of confusion unduly influencing your decision to purchase this product, or any other, product from JB Tools, and to ensure there is no confusion as to the existence of any affiliation between JB Tools and the manufacturer of this product. However, JB Tools’ customers can rest assured that JB Tools stands behind its Warranty Program and its Manufacturer Matching Policy,100% of the time. Furthermore, in connection with JB Tools’ satisfaction guarantee, JB Tools matches the price and/or any promotion associated with its products.