-
Description
The FiTech LS 500 HP EFI LS3 Intake 340LPH In-tank Master Kit (79711) is engineered to convert traditional carbureted LS engines to modern electronic fuel injection. This kit offers improved engine performance, fuel efficiency, and drivability. Designed for LS engines with LS3-style rectangular port cylinder heads, this system includes all necessary components for a comprehensive upgrade.
KEY FEATURES AND BENEFITS:
- Complete EFI System: Replaces carbureted LS engines, enhancing performance up to 500 horsepower.
- High-Performance Components: Includes a 92mm throttle body, 36 lb/hr injectors, and a 340 lph in-tank fuel pump.
- Self-Learning ECU: Automatically adjusts fuel and spark for optimized performance.
- User-Friendly Controller: 4.5-inch touchscreen allows for easy tuning and monitoring.
- Precise Engine Management: Sequential fuel and spark control with individual cylinder trim.
- Reliable Ignition System: Includes 8 LS3-style coils with LED indicators for enhanced visibility.
SPECIFICATIONS:
- Fuel Injection Style: Multi-port
- Fuel Injection System Type: Multi-port Throttle Body
- Maximum Horsepower: 500 HP (gas)
- Timing Control: Yes
- ECM Included: Yes
- Self Tuning: Yes
- User Tunable: Yes
- Fuel System: In-tank fuel pump module, return
- Ignition System: Coil packs
- User Interface: 4.5 in. display
- Throttle Body: 92mm, 1250 cfm
- Injectors: 36 lbs/hr
- Fuel Pump: 340 lph in-tank
- Intake Manifold: Aluminum, LS3 port
HOW TO USE:
- Preparation: Disconnect the negative battery terminal. Remove the existing carburetor and intake manifold.
- Installation: Install the FiTech LS3 port intake manifold and 92mm throttle body.
- Fuel System: Install the 340 lph in-tank fuel pump module. Connect the fuel lines to the fuel rails and regulator.
- Wiring: Connect the custom wiring harness to the ECU and engine sensors (MAP, IAT, TPS, O2).
- Ignition: Install the LS3-style ignition coils and connect them to the wiring harness.
- Sensors: Install the included oxygen sensor into the exhaust system.
- ECU Setup: Connect the handheld controller to the ECU. Follow the on-screen instructions to input engine parameters.
- Initial Start: Start the engine and allow the self-learning ECU to adjust fuel and spark.
- Tuning: Use the handheld controller to monitor and fine-tune engine parameters as needed.
BENEFITS OF USING THE FITECH LS 500 HP EFI LS3 INTAKE 340LPH IN-TANK MASTER KIT (79711):
- Enhanced Performance: Improved engine performance and horsepower.
- Fuel Efficiency: Increases fuel efficiency through precise fuel management.
- Improved Drivability: Enhances throttle response and overall drivability.
- Simplified Tuning: Self-learning capabilities make tuning easier.
- Reliable Delivery: High flow fuel pump ensures reliable fuel delivery.
- Modern Upgrade: Modernizes older LS engines with advanced fuel injection technology.
FEATURES:
- Durable Intake Manifold: Fabricated from 3mm thick aluminum sheet metal for durability.
- Throttle Body: Cast, cable-activated billet aluminum 92mm throttle body for optimal airflow.
- Handheld Controller: Comes with a color touchscreen and cable for user convenience.
- Windshield Mount: Included for easy access to the touchscreen controller.
- LS ECU: Features a 3-Bar MAP sensor for boosted applications.
- High Volume Fuel Rails: Designed to provide ample fuel delivery.
- Sequential Control: Offers sequential fuel and spark control with individual cylinder trim.
- Sensor Compatibility: Connects to 24x and 58x cam sensors for accurate performance data.
- Knock Sensor Control: Integrates with factory sensors for enhanced safety.
- Tach Output Driver: Works with most tachometers for accurate RPM readings.
- Programmable Electric Fan Outputs: Two outputs for managing electric fans efficiently.
- WBO2 Sensors Included: For precise air-fuel ratio monitoring.
- Custom Wiring Harness: Facilitates direct plug-in installation for ease of use.
- LED Indicators: On the ignition coils for improved visibility.
-
Customers Also Viewed
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
JB Tools Customer Satisfaction Guarantee: Although JB tools is often not an “authorized” re-seller of all the products it sells and is often not affiliated with the manufacturers or brands of the products it sells, JB Tools stands behind all of the products it sells, because the products JB Tools sells are genuine and authentic. Because JB Tools only sells genuine and authentic products, JB Tools offers its customers a 100% satisfaction guarantee. To ensure 100% customer satisfaction, JB Tools is committed to and strictly complies with its return policy, which offers replacement products to its customers (subject to product availability), or a full refund (less return shipping costs), at the customer’s option, and which you can access by clicking here.
Because JB Tools is an independent re-seller, JB Tools is able to offer the products it sells at the most competitive prices, resulting in substantial cost-savings passed directly to JB Tools’ customers. JB Tools prides itself in being a trusted, internet-based retailer that its customers can rely on for quality products at reasonable prices. JB Tools’ commitment to 100% customer satisfaction is unparalleled, which is why JB Tools offers its customers a best-in-class Warranty Program to all of its customers on all products sold by JB Tools. In the event a JB Tools customer believes that a product purchased from JB Tools has a defective condition and/or malfunctioning issue, JB Tools’ customers can rest assured JB Tools will work with its customers to ensure issues are resolved in accordance with JB Tools’ Warranty Program, which you can access by clicking here.
JB Tools Non-Affiliation Notice and Disclaimer: JB Tools holds itself out as neither the manufacturer, an affiliate of the manufacturer, or an “authorized” distributor of this product. By purchasing this product from JB Tools, purchasers may not be guaranteed any manufacturer-provided services offered by the manufacturer of this product (including any training or technical support that may otherwise be available). By purchasing this product from JB Tools, the manufacturers’ warranty, if any, potentially associated with the product may not be honored by the manufacturer. JB Tools provides this disclaimer to ensure there is no likelihood of confusion unduly influencing your decision to purchase this product, or any other, product from JB Tools, and to ensure there is no confusion as to the existence of any affiliation between JB Tools and the manufacturer of this product. However, JB Tools’ customers can rest assured that JB Tools stands behind its Warranty Program and its Manufacturer Matching Policy,100% of the time. Furthermore, in connection with JB Tools’ satisfaction guarantee, JB Tools matches the price and/or any promotion associated with its products.