Hi-Tech Industries White Vinyl, Plastic & Carpet Dye (HT-110)

Hi-Tech Industries White Vinyl, Plastic & Carpet Dye (HT-110) is an advanced aerosol solution specifically formulated to refresh and restore the interior surfaces of your automotive, marine, and recreational vehicles. This versatile dye effectively renews faded or discolored vinyl, plastic, and carpet, bringing back their original vibrancy and concealing common imperfections like stains and sun-fading. Designed for ease of use, it provides a cost-effective way to enhance the appearance of dashboards, door panels, seats, and carpets without the need for expensive replacements. The HT-110 dye ensures a consistent, permanent white finish that remains soft and flexible, preventing cracking, peeling, or rubbing off over time. Its precise spray pattern allows for smooth, even application, making interior restoration projects straightforward and efficient.

KEY FEATURES AND BENEFITS:

• Color Restoration and Renewal: Effectively brings faded and worn-out vinyl, plastic, and carpet surfaces back to their original white color, significantly improving the overall look of your vehicle's interior.
• Stain and Blemish Concealment: Provides excellent coverage for various stains, including difficult-to-remove bleach spots and red dyes, transforming unsightly areas into a uniform, clean appearance.
• Flexible and Soft Finish: The unique formulation ensures that treated surfaces remain soft and pliable, preventing the dye from becoming brittle, cracking, splitting, or peeling after application.
• Permanent Adhesion: Once applied and cured, the dye forms a permanent bond with the material, ensuring the color won't rub off onto clothing or fade quickly, providing a long-lasting solution.
• Cost-Effective Interior Upgrade: Offers an affordable alternative to replacing worn or stained interior components, saving you money while achieving a refreshed and renewed vehicle interior.
• Easy Aerosol Application: Packaged in a convenient aerosol can with a "snorkel tip" adjustable fan pattern, it allows for controlled, even, and efficient application with minimal overspray.

SPECIFICATIONS:

• When purchased, the product is shipped as: Aerosol can
• Net Weight: 11.25 oz (319g)

HOW TO USE:

1. Prepare the Surface: Begin by thoroughly cleaning the vinyl, plastic, or carpet surface you intend to dye. Remove all dirt, grease, oils, and any other contaminants. For carpet, vacuum thoroughly and use a stiff brush to lift the fibers and remove embedded debris. Ensure the surface is completely dry before proceeding.
2. Mask Off Areas: Carefully mask off any areas you do not wish to dye using painter's tape and plastic sheeting or newspaper. This protects surrounding surfaces from overspray.
3. Test the Dye: Before full application, always test the dye on an inconspicuous area of the material. This allows you to confirm color match and observe how the dye adheres and dries on that specific surface.
4. Shake the Can: Vigorously shake the aerosol can for at least one minute before use and periodically during application to ensure the contents are well mixed.
5. Apply Even Coats: Hold the can approximately 8 to 12 inches away from the surface. Apply the dye in light, even coats using a smooth, sweeping motion. Avoid applying a thick, heavy coat, as this can lead to stiffness, especially on fabric, or an uneven finish.
6. Brush into Carpet (if applicable): If dyeing carpet, immediately after spraying each light coat, use a clean brush to work the dye into the carpet fibers. This helps ensure even penetration and a softer feel.
7. Allow Drying Time: Allow each coat to dry to the point where it is no longer tacky to the touch before applying subsequent coats. Applying multiple thin coats will yield better results and a more even color than one heavy application.
8. Final Drying: Once satisfied with the coverage, allow the dyed surface to dry completely before use. Drying times may vary depending on humidity and temperature.

BENEFITS OF USING HI-TECH INDUSTRIES WHITE VINYL, PLASTIC & CARPET DYE (HT-110):

• Extends the life and appearance of your vehicle's interior components, delaying the need for expensive replacements.
• Enhances the resale value and aesthetic appeal of your car, truck, RV, or boat.
• Provides a professional-looking finish that integrates seamlessly with existing interior materials.
• Simplifies interior detailing and restoration, making it accessible for both professionals and DIY enthusiasts.
• Maintains the original texture and feel of surfaces, ensuring comfort and visual consistency.
• Environmentally compliant formulation, adhering to California / OTC VOC standards.

FEATURES:

• Formulated to create a soft, flexible finish on treated surfaces.
• Aerosol format for convenient, ready-to-use application.
• Integrated "snorkel tip" nozzle designed for precise spray control and reduced overspray.
• Specifically matched white color (HT-110) for consistent results.
• Suitable for a wide range of interior materials including vinyl, plastic, and various carpet types.
• Designed to be a permanent, non-flaking, and non-peeling coating.
• Resistant to rubbing off once fully cured, maintaining a clean interior.
• Compliant with California / OTC VOC regulations.