Jet J-A5816 115/230V 1PH 15" Floor Model Drill Press (354550)

Jet J-A5816 115/230V 1PH 15" Floor Model Drill Press (354550) is a heavy-duty 15" variable speed floor drill press ideal for workshops and professional applications. It features a powerful 1 HP motor with a wide speed range (400-5000 RPM) for drilling a variety of materials. The variable speed control allows for precise adjustment during operation, ensuring optimal drilling performance.

KEY FEATURES AND BENEFITS:

• Variable Speed Control (400-5000 RPM): Allows for precise drilling in a wide range of materials.
• Large Quill (2-1/4") & Column (3") Diameter: Provides superior stability and accuracy for drilling.
• Deep Hole Drilling Capacity (6" Stroke): Enables drilling of deep holes in a single pass.
• Durable Construction: Built to withstand demanding workshop and professional use.
• User-Friendly Features: Includes an accurate depth stop, a 1/2" drill chuck and arbor, and a safety collar for enhanced control and safety.

SPECIFICATIONS:

• Model Number: J-A5816
• Drilling Capacity:
  • Cast Iron: 5/8"
  • Mild Steel: 1/2"
• Spindle Taper: MT-2
• Range of Spindle Speeds (RPM): 400 - 5,000
• Column Diameter: 3"
• Spindle Travel: 6"
• Table Size: 15" x 18"
• Overall Dimensions (L x W x H): 30" x 20" x 71"
• Weight: 426 lbs.

HOW TO USE:

• Secure the workpiece: Clamp your workpiece securely to the drill press table using a vise or clamps. Ensure the workpiece is positioned correctly for the desired hole location.
• Adjust the table height: Raise or lower the table using the table adjustment crank handle to position the workpiece at the appropriate height for drilling.
• Set the drilling speed: Using the handwheel, select the desired drilling speed based on the material and hole size. Refer to a drill bit speed chart for recommended speeds.
• Install the drill bit: Loosen the chuck, insert the appropriate drill bit shank into the chuck, and tighten securely using the chuck key.
• Engage the quill feed: Lower the quill (drill bit) towards the workpiece using the quill feed handle. Make sure the drill bit is centered on the desired hole location.
• Start drilling: Apply light downward pressure on the quill feed handle and power on the drill press. Drill slowly and steadily, maintaining control of the feed rate.
• Use the depth stop (optional): If drilling to a specific depth, set the depth stop to the desired depth and it will automatically disengage the feed when reached.
• Disengage the quill feed and power off: Once the hole is complete, raise the quill using the quill feed handle and power off the drill press.

BENEFITS OF USING THE Jet J-A5816 115/230V 1PH 15" Floor Model Drill Press (354550):

• Precise Drilling Control: The variable speed control and large quill/column diameter ensure accurate and consistent drilling results.
• Versatility: The wide speed range and drilling capacity allow you to tackle a variety of drilling projects in different materials.
• Deep Hole Drilling: The 6" stroke is ideal for drilling deep holes without repositioning the workpiece.
• Durable Construction: Built to last with high-quality materials for long-term use in demanding environments.
• User-Friendly Features: The depth stop, chuck and arbor, and safety collar enhance ease of use and operator safety.

FEATURES:

• Full bearing support on quill for maximum spindle stiffness.
• Handwheel speed adjustment of 400 to 5,000 RPM.
• 3" column diameter for maximum head support.
• Accurate depth stop for precise hole depths.
• 1/2" drill chuck and arbor included.
• Safety collar.