Lang Tools 11 Offset Valve Tappet Gauge Set - Imports (3085)

The Lang Tools 11 Offset Valve Tappet Gauge Set - Imports (3085) is an indispensable tool for anyone performing maintenance on import vehicle engines. This specialized feeler gauge set is engineered to provide precise measurements and facilitate accurate adjustments of valve tappets, even in the most confined engine compartments. Designed with a keen understanding of import vehicle mechanics, the set ensures that achieving proper valve lash is not just possible, but also efficient and comfortable.

KEY FEATURES AND BENEFITS:

• Optimized for Import Vehicles: Specifically designed with a 30-degree offset on each blade, allowing for easy access to valve tappets on a wide range of import car engines where space is often limited. This design significantly simplifies the adjustment process.
• Comprehensive Blade Range: Includes eleven precisely sized blades, from 0.004" to 0.014" (0.102mm to 0.356mm), ensuring you have the correct thickness for various valve clearance specifications. Each blade is clearly etched with its size for quick identification.
• User-Friendly Design: Features two E-Z grip handles that provide comfort and control during use, reducing hand fatigue during lengthy adjustments.
• Interchangeable Blades: A practical screw and nut mechanism allows for quick and easy swapping of blades, enabling you to use only the necessary sizes or replace individual blades if they become worn or damaged.
• Accurate Adjustments: Provides the necessary precision for setting valve lash correctly, which is vital for optimal engine performance, fuel efficiency, and to prevent premature wear of valve train components.

SPECIFICATIONS:

• Manufacturer Part Number: 3085
• Blade Quantity: 11
• Blade Length: 3 inches
• Blade Width: 1/2 inch
• Blade Offset Angle: 30 degrees
• Included Blade Thicknesses: 0.004", 0.005", 0.006", 0.007", 0.008", 0.009", 0.010", 0.011", 0.012", 0.013", 0.014"
• Included Components: Eleven feeler blades, two E-Z grip handles.
• Product Dimensions: 7.813" X 3.5" X 0.625"

HOW TO USE:

1. Prepare the Engine: Ensure the engine is cool before attempting to set valve tappets, as hot engines can give inaccurate readings due to thermal expansion. Refer to your vehicle's service manual for specific procedures on bringing the engine to the correct position for valve adjustment (e.g., top dead center for cylinder 1).
2. Select the Correct Blade: Consult your vehicle's service manual to determine the precise valve clearance specification for your engine. Select the corresponding blade thickness from the Lang Tools 3085 set.
3. Attach Blade to Handle: If not already assembled, attach the selected blade to one of the E-Z grip handles using the screw and nut feature. Ensure the blade is securely fastened.
4. Measure the Clearance: Insert the selected feeler gauge blade between the valve stem and the rocker arm (or cam lobe, depending on engine design). The blade should slide in with a slight drag, indicating the correct clearance. If it's too loose or too tight, adjustment is necessary.
5. Adjust the Tappet (if needed): Using the appropriate tools (typically a wrench and a screwdriver), loosen the lock nut on the tappet adjusting screw. Turn the adjusting screw until the feeler gauge slides with the specified drag.
6. Secure the Adjustment: While holding the adjusting screw in place to prevent it from turning, tighten the lock nut. Re-check the clearance with the feeler gauge to ensure it hasn't changed during tightening.
7. Repeat: Move to the next valve according to your vehicle's service manual and repeat steps 2–6 until all valve tappets have been checked and adjusted.

BENEFITS OF USING LANG TOOLS 11 OFFSET VALVE TAPPET GAUGE SET - IMPORTS (3085):

• Enables precise measurement of valve clearances, crucial for engine health.
• Simplifies accessing tight spaces common in import engine designs.
• Contributes to optimal engine performance and fuel efficiency.
• Helps prevent premature wear of valve train components.
• Offers comfortable and controlled handling during adjustments.
• Allows for quick blade changes and replacements, enhancing usability.

FEATURES:

• Eleven individual feeler blades for diverse applications.
• Blades are precision-ground for consistent thickness.
• Etched markings on each blade for clear size identification.
• Two distinct handles included for versatile use.
• Handles engineered for comfortable gripping.
• Quick-release screw mechanism for blade attachment.
• Specialized 30-degree blade bend for enhanced reach.
• Compact size for convenient storage and transport.