Lang Tools 3-Pieces Extra Long Pin Punch Set (856-3ST)

The Lang Tools 3-Pieces Extra Long Pin Punch Set (856-3ST) is an essential addition to any professional or serious enthusiast's toolkit, providing specialized capability for tasks that standard punches simply cannot reach. This set stands out due to its exceptional 16-inch length, offering unparalleled access to deeply recessed pins in a variety of applications, from intricate engine components to heavy-duty truck and trailer systems. Each punch is expertly forged from high carbon molybdenum tool steel, a material selected for its superior strength and resilience, ensuring these tools withstand rigorous use over time.

KEY FEATURES AND BENEFITS:

• Extended Reach: The standout 16-inch overall length provides crucial access to deeply recessed or hard-to-reach pins, eliminating the need for makeshift solutions and improving efficiency.
• Comprehensive Sizing: Includes three essential tip diameters – 1/4", 5/16", and 3/8" – covering a wide range of pin sizes commonly encountered in various applications.
• Enhanced Durability: Forged from hardened, high carbon molybdenum tool steel, these punches offer exceptional strength and resistance to bending or breaking, ensuring a long service life.
• Comfortable and Secure Use: Each punch features an ergonomic handle designed for a firm, comfortable grip, allowing for precise control and reduced hand strain during operation.
• Effective Striking: Equipped with a striking cap, the punches can be confidently hammered to apply necessary force, facilitating the removal of stubborn pins while reducing impact vibration.
• American Made Quality: Proudly manufactured in the U.S.A., ensuring high standards of craftsmanship and material quality.

SPECIFICATIONS:

• Tip Diameters: 1/4 inch, 5/16 inch, 3/8 inch
• Overall Length: 16 inches
• Material: Hardened, high carbon molybdenum tool steel
• Included in Product: Three extra long pin punches (1/4", 5/16", 3/8" tip diameters)

HOW TO USE:

1. Select the Correct Punch: Identify the pin you need to remove and choose the punch from the set that has a tip diameter slightly smaller than the pin's diameter. This ensures proper contact and prevents damaging the pin or surrounding material.
2. Position the Punch: Place the tip of the selected extra long pin punch squarely on the center of the pin. Ensure the punch is aligned straight with the pin to avoid bending or slipping.
3. Apply Force (Initial Taps): With the punch firmly in place and holding the ergonomic handle, use a hammer to deliver light, controlled taps to the striking cap. This initial force helps to "break" the pin free if it's tightly seated or rusted.
4. Increase Force (If Needed): If the pin does not budge with light taps, gradually increase the force of your hammer strikes. Maintain control and a steady aim to drive the pin out cleanly. The extra length of the punch allows you to reach deep pins and apply force effectively.
5. Drive the Pin Out: Continue striking until the pin is fully pushed out of its housing or sufficiently recessed for removal by other means, such as pliers or a magnetic pickup tool. Always be aware of where the pin will exit to avoid losing it.
6. Clean and Store: After use, wipe down the punches to remove any debris or grease. Store the set in a dry place to prevent rust and keep them ready for your next task.

BENEFITS OF USING LANG TOOLS 3-PIECES EXTRA LONG PIN PUNCH SET (856-3ST):

• Access to Confined Spaces: The primary benefit is the ability to reach and manipulate pins located deep within machinery, engines, or chassis where standard punches cannot. This saves time and effort, often eliminating the need to disassemble surrounding components.
• Reduced Risk of Damage: By using the correct size and an appropriately long punch, you minimize the risk of damaging the pin itself or the surrounding material due to awkward angles or insufficient reach.
• Increased Efficiency: Quick and precise pin removal or installation translates directly into faster project completion times, whether for repairs or assembly.
• Enhanced Safety: A secure grip and controlled striking action, facilitated by the ergonomic handle and striking cap, reduce the chance of slips or missed strikes, improving user safety.
• Professional Results: Designed for demanding applications, this set helps achieve clean and accurate work, contributing to the overall quality of repairs and maintenance.
• Long-Term Value: The robust construction from high-quality materials ensures that these tools will withstand repeated heavy use, providing reliable service for many years.

FEATURES:

• 16-inch extended reach for deep access applications.
• Three essential punch sizes included: 1/4", 5/16", and 3/8" tip diameters.
• Constructed from resilient high carbon molybdenum tool steel.
• Engineered with an ergonomic handle for comfortable and firm grip.
• Integrated striking cap for effective hammering and force transmission.
• Precision-machined tips for accurate pin engagement.
• Designed to withstand significant impact and stress.
• Proudly manufactured in the United States of America.
• Ideal for automotive, heavy equipment, and industrial maintenance.
• Resistant to bending and deformation under normal use.