Norseman 3000W 240V T3B Convection Heater w/T'stat (XB4-6300T3B31T)

The Norseman 3000W 240V T3B Convection Heater w/T'stat (XB4-6300T3B31T) is a specialized electric heating solution engineered for safety and performance in hazardous industrial environments. This explosion-proof heater provides reliable and consistent warmth using natural convection, making it ideal for spaces where flammable gases, vapors, or combustible dusts may be present. Its robust design, combined with strict safety certifications, ensures secure operation in the most demanding applications.

KEY FEATURES AND BENEFITS:

• Explosion-Proof Design: Certified for Class I, Division 1 & 2, Groups A, B, C & D, and Class II, Division 1 & 2, Groups E, F, G, as well as Class III, Division 1 & 2, ensuring safe operation in various hazardous atmospheres.
• Precise Temperature Control: Features a built-in thermostat allowing for accurate management of ambient temperatures, optimizing comfort and energy use while maintaining safety parameters.
• Efficient Convection Heating: Utilizes natural convection to distribute heat evenly and safely throughout the designated area, avoiding high surface temperatures that could pose a risk in hazardous locations.
• Low Surface Temperature (T3B Code): The T3B temperature code guarantees that the heater's maximum surface temperature will not exceed 165°C (329°F), critical for preventing ignition of hazardous substances.
• Durable Construction: Built with copper-free aluminum extruded convector and high-mass fins, designed for long-term performance and resistance to oxidation in challenging industrial settings.

SPECIFICATIONS:

• Power: 3000 Watts
• Voltage: 240 Volts
• Phase: Single Phase
• Heat Output: 10,236 BTU/hour
• Temperature Code: T3B
• Product Depth: 8.5 inches
• Product Width: 33 inches
• Product Height: 30.25 inches
• Weight: 100-105 lbs.
• Amperage: 12.5 Amps
• Operating Temperature Range: Minimum -40°F (-40°C) Ambient; Maximum 104°F (40°C) Ambient

HOW TO USE:

1. Mounting: Position the heater vertically. Use the supplied dual-purpose brackets to securely mount the unit to a wall or place it on the floor in the desired location within the hazardous area.
2. Electrical Connection: Ensure the main power supply is turned off. Access the built-in terminal block (on multi-heat sink units) by removing the threaded covers of the x-Max® housing. Connect the 240V electrical supply wiring according to local electrical codes and the manufacturer's wiring diagram.
3. Secure Covers: Once wiring is complete, securely replace and tighten the threaded covers on the x-Max® housing to maintain the explosion-proof integrity of the unit.
4. Power On: Restore power to the heater.
5. Set Thermostat: Adjust the built-in thermostat to the desired temperature setting. The heater will then automatically maintain the set temperature by cycling on and off.
6. Maintenance: Periodically inspect the heater for any damage or obstruction to the air intake/output vents. Ensure wire guards remain in place. Refer to the product manual for detailed maintenance procedures specific to hazardous location equipment.

BENEFITS OF USING NORSEMAN 3000W 240V T3B CONVECTION HEATER W/T'STAT (XB4-6300T3B31T):

• Enhanced Safety in Hazardous Areas: Specifically engineered and certified to operate safely in environments prone to explosions, significantly reducing ignition risks.
• Consistent, Gentle Heat: Provides steady, even heat distribution without forced air, which can stir up dust or create uneven temperature zones.
• Reduced Fire Risk: The low surface temperature rating (T3B) is crucial for preventing the ignition of combustible materials or gases.
• Long-Term Reliability: Constructed with high-quality, corrosion-resistant materials designed to withstand the rigors of industrial applications, ensuring a longer service life.
• Easy Integration: Designed for straightforward installation with multiple tapped conduit entries and a built-in terminal block.
• Energy Efficiency: The integrated thermostat helps regulate power consumption by only operating when needed to maintain the set temperature.

FEATURES:

• cCSAus and CE/ATEX certified for hazardous location use.
• Patented x-Max® terminal housing for secure wiring.
• Large convector surface area with high-mass fins.
• Black anodized convector surfaces for optimal heat transfer and oxidation resistance.
• Includes dual-purpose brackets for versatile mounting options.
• Integrated wire guards supplied as standard.
• Designed for vertical positioning.
• Hardwired installation type for permanent placement.
• Suitable for heating rooms between 500-1000 square feet.