Phoenix USA 19-Cur Chev C4500/5500/6500 DOT Sim Set (NH8495)

The Phoenix USA 19-Cur Chev C4500/5500/6500 DOT Sim Set (NH8495) is a four-piece collection of polished stainless steel wheel simulators meticulously engineered to enhance the visual appeal of your medium-duty commercial vehicle. Designed for specific Chevrolet, Ford, Freightliner, International, and Hino truck models equipped with 19.5" x 6.75" wheels featuring an 8-lug configuration and a 275mm bolt circle, this DOT-compliant set offers a straightforward method to achieve the appearance of high-end aluminum wheels without the associated cost or installation complexities. Constructed from robust T304L grade stainless steel, these simulators are built to withstand the rigors of daily use and provide lasting resistance against rust and corrosion, ensuring a consistently polished look for your vehicle. The set includes two front simulators with a carefully designed dish and two rear simulators with a deeper dish, tailored to complement the contours of your truck's wheels. Installation is simplified with an over-the-lug mounting system, eliminating the need for wheel removal or specialized tools. This user-friendly design allows for quick and secure attachment directly over your existing 33mm hexagonal original equipment lug nuts with 22mm lug studs. Front simulators feature convenient pop-out centers, granting easy access to the hubs for maintenance without requiring complete simulator removal. The inclusion of four hand holes on each simulator facilitates handling and further simplifies any necessary access. This Phoenix USA simulator set not only elevates your vehicle's aesthetics but also maintains DOT compliance and is designed to be warranty-friendly. Each set comes complete with the necessary mounting hardware, an installation tool to aid in secure attachment, and a comprehensive instruction sheet to guide you through the simple installation process.

KEY FEATURES AND BENEFITS:

• Enhanced Vehicle Appearance: Instantly upgrades the look of standard steel wheels to resemble premium aluminum alloy wheels, providing a more professional and polished image for your truck.
• DOT Compliant: Meets the safety regulations set by the Department of Transportation, ensuring the product is suitable for commercial vehicle use.
• Simple Over-the-Lug Installation: Attaches directly over the existing lug nuts, requiring no removal of lug nuts or lifting of the vehicle, saving time and effort during setup.
• Durable Stainless Steel Construction: Manufactured from high-quality polished T304L stainless steel, offering exceptional resistance to corrosion, rust, and the elements, ensuring long-lasting performance and appearance.
• Front Pop-Out Centers: Provide convenient access to wheel hubs for maintenance checks or adjustments without the need to detach the entire simulator.
• Vehicle Compatibility: Specifically engineered for a range of popular medium-duty truck models from Chevrolet, Ford, Freightliner, International, and Hino with specified wheel and lug configurations.
• Complete Installation Kit: Includes all necessary mounting hardware and a specialized tool to facilitate a secure and hassle-free installation process.
• Warranty Friendly: Designed to be compatible with your vehicle's original manufacturer warranty, providing peace of mind.
• Easy Maintenance: The smooth stainless steel surface is easy to clean and maintain, helping to keep your wheels looking their best with minimal effort.

SPECIFICATIONS:

• Product Name: Phoenix USA DOT Sim Kit
• Part Number: NH8495
• Material: Polished T304L Stainless Steel
• Wheel Size Compatibility: 19.5" x 6.75"
• Lug Count: 8
• Bolt Circle: 275mm
• Lug Stud Diameter Compatibility: 22mm
• Original Equipment (OE) Lug Nut Compatibility: 33mm Hex
• Hand Holes: 4 per simulator
• Brake Compatibility: Hydraulic Brake systems
• Set Includes: 2 Front Wheel Simulators (dished), 2 Rear Wheel Simulators (deep dished), Mounting Hardware, Installation Tool, Instruction Sheet
• Vehicle Fitment: Chevrolet Silverado 4500/5500/6500 HD (2019-2023), Ford F-650 (2004-2013, 2015-2019, 2021-2024), Freightliner FL50/FL60/M2 series, Hino 198/238/258/258LP, International 4300/4600/4700/CV515/MV607/MV60E, Peterbilt 325 (2008-2022)

HOW TO USE:

1. Preparation: Ensure your vehicle's wheels are the correct size (19.5" x 6.75"), have an 8-lug pattern, and a 275mm bolt circle. Verify that your lug nuts are 33mm hexagonal OE nuts with 22mm studs. Clean the wheel area for proper simulator seating.
2. Front Simulator Installation: Position a front wheel simulator against the wheel, aligning the lug nut openings on the simulator with the lug nuts on the wheel. Using the provided installation tool, tighten the simulator onto the wheel by engaging the tool with the designated points on the simulator and ensuring it sits flush against the wheel surface. Do not overtighten.
3. Rear Simulator Installation: Similarly, position a rear wheel simulator against the rear wheel, aligning the lug nut openings. Use the installation tool to securely tighten the rear simulator onto the wheel. Ensure a snug fit without excessive force.
4. Check and Adjust: After installing all four simulators, visually inspect each one to ensure it is properly seated and securely attached. If any adjustments are needed, use the installation tool to carefully tighten or loosen as necessary.
5. Periodic Inspection: Regularly check the simulators to ensure they remain securely fastened, especially after initial use and during routine vehicle maintenance.

BENEFITS OF USING PHOENIX USA 19-CUR CHEV C4500/5500/6500 DOT SIM SET (NH8495):

• Elevated Aesthetic Appeal: Transforms the standard appearance of your truck's wheels, projecting a more refined and professional image on the road, which can be particularly beneficial for customer-facing businesses.
• Cost-Effective Upgrade: Provides the visual benefits of expensive aluminum wheels at a significantly lower cost, offering an economical way to enhance your vehicle's looks.
• Simplified Installation: The over-the-lug design makes installation quick and easy, minimizing downtime and eliminating the need for professional installation services.
• Long-Term Durability: The polished stainless steel construction ensures the simulators can withstand various weather conditions and the demands of regular use, maintaining their appearance over time.
• Maintained DOT Compliance: As a DOT-approved product, you can be confident that these simulators meet necessary safety standards for commercial vehicle operation.
• Easy Access for Maintenance: The front pop-out centers allow for convenient access to the wheel hubs for essential maintenance without the hassle of complete removal.
• Broad Vehicle Compatibility: Designed to fit a wide range of popular medium-duty truck models, offering a versatile solution for fleet or individual vehicle owners.

FEATURES:

• Constructed from premium grade T304L polished stainless steel for superior resistance to corrosion and lasting shine.
• Engineered with a specific fitment for 19.5" x 6.75" wheels with an 8-lug, 275mm bolt circle pattern.
• Designed for direct mounting over existing 33mm hexagonal OE lug nuts with 22mm lug studs.
• Includes two front simulators with a contoured dish and two rear simulators with a deeper dish to match wheel profiles.
• Features four strategically placed hand holes for easier handling during installation and removal.
• Front simulators are equipped with pop-out center caps for quick access to the hub assembly.
• Utilizes a secure over-the-lug mounting system that does not require the removal of factory lug nuts.
• Supplied as a complete set with all necessary mounting hardware and a dedicated installation tool.
• Manufactured to meet Department of Transportation (DOT) standards for safe commercial vehicle operation.
• Designed to be compatible with hydraulic brake systems commonly found on these truck models.