Plasti Dip Blaze Yellow Spray Rubber Coating (11222)

Plasti Dip Blaze Yellow Spray Rubber Coating (11222) is an 11 oz aerosol synthetic rubber coating from the high-visibility Blaze line, formulated to deliver a fluorescent yellow finish while providing the protective performance associated with Plasti Dip. It air-dries into a thick, rubberized barrier that bonds to multiple substrates, including metal, wood, glass, plastic, and fiberglass, creating a matte neon surface designed for visibility and identification.

Once cured, the coating helps protect against moisture, acids, alkaline substances, corrosion, and mechanical wear. The rubberized texture also improves grip by adding a cushioned, non-skid surface on handles and contact points. A major advantage is reversibility: the flexible film can be peeled from many smooth, non-porous surfaces without residue, making it suitable for temporary safety marking, seasonal color changes, or projects where removability is important.

Key Features and Benefits:

• Fluorescent finish: Blaze Yellow neon pigment increases visibility for safety gear, tools, and automotive accents.
• Removable coating: Peelable film supports reversible modifications on many non-porous surfaces.
• Environmental resistance: Protects against moisture, acids, and corrosion while staying flexible from -30¡F to 200¡F.
• Grip enhancement: Rubberized texture adds a cushioned, non-slip surface for improved handling control.
• Electrical insulation: Dielectric properties support insulation and can help reduce vibration transfer.

Specifications:

• Part Number: 11222
• Color: Blaze Yellow
• Capacity: 11 oz (311g)
• Container Type: Aerosol spray can
• Finish: Matte
• Temperature Range: -30¡F to 200¡F
• Included in Box: (1) 11 oz can of Plasti Dip Blaze Yellow

How to Use:

• Surface cleaning: Remove dirt, grease, oil, and wax; ensure the surface is completely dry.
• Shake thoroughly: Shake for 1 minute after the mixing ball rattles; shake occasionally during use.
• Apply in good conditions: Aim for 70¡FÐ80¡F and humidity below 60% for best results.
• Spray distance: Hold the can 6Ð10 inches from the surface.
• Spray technique: Use steady, overlapping passes to maintain an even, wet-looking coat.
• Build thickness: Apply 4Ð5 coats to improve durability and make peeling easier later.
• Dry between coats: Allow at least 30 minutes between coats.
• Final dry before handling: Let the final coat dry for at least 4 hours before use.

Benefits of Using Plasti Dip Blaze Yellow Spray Rubber Coating (11222):

• Higher visibility for safer work: Neon yellow makes tools, rails, and equipment easier to spot in low-light or cluttered areas.
• Extended equipment life: Rubber barrier helps resist impact and abrasion while sealing against moisture and corrosion.
• Outdoor-ready flexibility: Temperature resilience helps prevent cracking and brittleness across seasonal conditions.
• Reversible protection: Peelable design supports testing color schemes or protective layers without permanent commitment.
• Improved control: Cushioned, non-slip surface can reduce handling slips on high-use contact points.

Features:

• Aerosol delivery: Pressurized spray supports uniform coverage on complex shapes and hard-to-reach areas.
• High stretch ratio: Flexible film maintains elongation to move with the substrate without tearing.
• Dielectric strength: Insulating properties suitable for certain protective applications on components.
• Vibration dampening: Rubber thickness can help reduce noise and mechanical vibration.
• Acid and alkaline resistance: Formulated to withstand chemical exposure without rapid degradation.
• Weatherproof seal: Helps create a watertight barrier to reduce rust and oxidation on metal.
• Matte texture: Non-reflective finish helps hide surface imperfections and reduces glare.
• Multi-substrate adhesion: Bonds to concrete, stone, and fiberglass in addition to common metals and plastics.