Sharpe 1.3 mm Tip RAZOR Compliant Spray Gun (253442)

The Sharpe 1.3 mm Tip RAZOR Compliant Spray Gun (253442) is an advanced tool for professional painters who require precision, efficiency, and a superior finish. Engineered with compliant technology, this spray gun meets modern environmental standards while delivering high-quality results. Its 1.3 mm fluid tip handles a wide variety of applications, from fine base coats to thick clear coats. With all-stainless steel fluid passages, the gun is compatible with waterborne paints and built for long-term performance. The ergonomic, lightweight design reduces fatigue, ensuring a consistent spray pattern throughout every project.

KEY FEATURES AND BENEFITS:

• Superior Atomization: Provides a finely atomized spray for smooth, high-quality finishes with minimal texture, ideal for base and clear coats.
• High Transfer Efficiency: Minimizes overspray and material waste, saving money and reducing cleanup time.
• Versatile Application: The 1.3 mm tip works with a wide range of materials, from light base coats to heavier clear coats and high-solid single-stage paints.
• Corrosion Resistance: 100% stainless steel fluid passages, needle, and nozzle ensure compatibility with waterborne paints and prevent internal corrosion.
• Ergonomic Comfort: Lightweight, balanced design with a low trigger pull allows comfortable, controlled use during long painting sessions.

SPECIFICATIONS:

• Part Number: 253442
• Fluid Tip Size: 1.3 mm
• Max. Air Inlet Pressure: 35 psi (0.24 MPa, 2.4 bar)
• Air Consumption: 11.2 CFM at 35 psi (2.4 bar)
• Air Inlet Size: 1/4" npsm (R 1/4 - 19)
• Cup Size: 23 oz (0.68 L)
• Weight with Cup: 1.3 lb (0.6 kg)
• Finish: Nickel
• Pattern Size: 14 inches

HOW TO USE:

• Prepare the Gun: Ensure the spray gun is clean and properly assembled. Attach the 23 oz gravity cup and fill it with your prepared paint.
• Connect to Air Supply: Attach the 1/4" air inlet to your compressor hose. Set the compressor to 35 psi while the trigger is pulled, as measured at the gun's inlet.
• Adjust the Settings: Use the air adjustment valve to fine-tune pressure, the fluid control knob to regulate paint flow, and the pattern knob to control fan width.
• Practice: Test the spray on scrap material. Adjust settings for a consistent, even fan pattern without runs or texture.
• Spray Application: Hold the gun perpendicular to the surface, maintain 6-8 inches distance, and move steadily. Overlap each pass by 50% and release the trigger at the end of each pass.

BENEFITS OF USING SHARPE 1.3 MM TIP RAZOR COMPLIANT SPRAY GUN (253442):

• Reduced material waste through high transfer efficiency.
• Improved finish quality with smooth, uniform coatings.
• Compliance with environmental standards for responsible use.
• Long-term reliability with corrosion-resistant stainless steel components.
• Enhanced comfort and control with ergonomic, lightweight design.

FEATURES:

• Nickel-plated finish for easy cleaning and maintenance
• 100% stainless steel fluid passages for corrosion resistance
• Ergonomic handle and lightweight body for comfortable handling
• Low trigger pull to reduce hand strain
• Adjustable fluid, fan, and air controls for fine-tuning spray performance
• Compatible with waterborne and solvent-based paints
• Includes 23 oz gravity-fed aluminum cup