3M™ PPS™ Lid & Liner Kits each contain 50 disposable lids with welded-in filters to strain paint material while spraying, along with 50 liners and 20 sealing plugs for use with the 3M™ Paint Preparation System. Kits are available in five sizes for a range of jobs large and small. PPS™ is a complete painting system that allows the painter to measure, mix, filter and spray paint materials.
- Designed for use with 3M™ Paint Preparation System, PPS™
- Kits contain disposable lids with micron filters, liners and sealing plugs
- Stock PPS™ Lids & Liners efficiently and cost-effectively
- PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
- System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
- Reduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption
- PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems
- Sealing plugs allow for temporary sealing and protection of non-catalyzed paint material
Lids and liners are sized specifically for the range of 3M™ PPS™ Cups & Collars, allowing technicians to mix graduated measurements of up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:
- 3M™ PPS™ Lid & Liner Kit Micro Size – for use with 3 fluid oz (90 mL) PPS™ Cups & Collars, ideal for spot repairs
- 3M™ PPS™ Lid & Liner Kit Mini Size – for use with 6 fluid oz (180mL) PPS™ Cups & Collars, excellent for 1-panel repairs
- 3M™ PPS™ Lid & Liner Kit Midi Size – for use with 13.5 fluid oz (400mL) PPS™ Cups & Collars, great for 2-panel repairs
- 3M™ PPS™ Lid & Liner Kit Standard Size – for use with 22 fluid oz (650mL) PPS™ Cups & Collars, excellent for 3-panel repairs
- 3M™ PPS™ Lid & Liner Kit Large Size – for use with 28 fluid oz (850mL) PPS™ Cups & Collars, ideal for 4-panel repairs
3M™ PPS™ UV Standard Lid & Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.