American Forge & Foundry 120Ft-lb Dark Gray Torque Socket (40213)

The American Forge & Foundry 120Ft-lb Dark Gray Torque Socket (40213) is an essential tool for any toolkit. This specialized socket prevents overtightening or uneven tightening of lug nuts, ensuring no damage is caused to your vehicle. Designed with a precise torque limit, the risk of wheel and brake rotor damage is significantly minimized as the socket stops increasing torque once the specified limit is achieved and absorbs any additional impact.

KEY FEATURES AND BENEFITS:

• Precise Torque Control: This socket is designed to limit torque application to exactly 120 ft/lbs (163 Nm), preventing overtightening of lug nuts. This helps protect wheels, brake rotors, and studs from damage.
• Damage Prevention: By stopping further torque application once the preset limit is reached, it significantly reduces the risk of warping brake rotors, stripping lug nuts or studs, and damaging expensive wheels.
• Consistent Tightening: Ensures all lug nuts are tightened to the same, correct specification, which is vital for wheel balance, vehicle stability, and safety.
• Durable Construction: Made from chrome molybdenum spring steel, known for its strength and ability to flex under pressure. This material choice provides a long operational life.
• Corrosion and Scratch Resistance: A protective powder-coated finish helps the socket resist common wear and tear, including scratches and corrosion, maintaining its appearance and function over time.
• Easy Identification: The size (19mm) and torque rating (120 ft/lbs) are clearly roll-stamped on the drive end, allowing for quick and accurate selection in busy work environments.
• Enhanced Efficiency: When used with an impact wrench, this socket streamlines the wheel installation process by eliminating the need for constant checks with a separate torque wrench, saving time and effort.

SPECIFICATIONS:

• Brand: American Forge & Foundry
• Type: Torque Limited Socket
• Drive Size: 1/2 inch
• Socket Size: 19mm
• Torque Rating: 120 ft/lbs
• Color: Dark Gray
• Material: Chrome Molybdenum Spring Steel
• Finish: Powder Coated
• Included in Product: 1x American Forge & Foundry 120Ft-lb Dark Gray Torque Socket (DKGYUSE)

HOW TO USE:

1. Select the Correct Socket: Identify the 19mm, 120 ft/lbs, Dark Gray torque limited socket. Ensure it matches the size of the lug nuts on your vehicle.
2. Attach to Impact Wrench: Firmly attach the 1/2-inch drive end of the torque limited socket to your 1/2-inch drive impact wrench. Ensure the impact wrench is set to deliver at least 250 Ft./Lb. at 90-100 PSI for optimal performance.
3. Place on Lug Nut: Position the socket squarely onto the lug nut you intend to tighten. Ensure the socket is fully seated over the nut to prevent slipping.
4. Engage Impact Wrench: Begin tightening the lug nut using the impact wrench. The socket will continue to turn until the internal spring steel reaches the 120 ft/lbs torque limit.
5. Observe Torque Limit: As the socket approaches and reaches its torque limit, it will flex internally and absorb further impact, preventing the lug nut from being tightened beyond 120 ft/lbs. You will notice the impact wrench continue to hammer, but the lug nut will no longer get tighter.
6. Move to Next Lug Nut: Once the socket has reached its limit on one lug nut, remove it and move to the next, following the manufacturer's recommended tightening sequence (e.g., star pattern) for wheels.
7. Do Not Exceed Limit: Avoid using a standard torque wrench to further tighten lug nuts after using this socket, as it would defeat the purpose of the torque limit and could lead to overtightening.

BENEFITS OF USING AMERICAN FORGE & FOUNDRY 120FT-LB DARK GRAY TORQUE SOCKET (40213):

• Prevents common issues associated with overtightened lug nuts, such as damaged studs or stripped threads.
• Helps maintain the structural integrity of your vehicle's wheels and brake rotors by ensuring proper, even tightening.
• Offers an efficient method for securing wheels, reducing the time required for tire changes or maintenance.
• Contributes to vehicle safety by ensuring consistent and accurate fastening of critical components.
• Eliminates guesswork in achieving correct torque specifications, simplifying the task for both experienced mechanics and DIY enthusiasts.

FEATURES:

• Integrated torque-limiting mechanism.
• Designed for 1/2-inch drive impact tools.
• Specifically sized for 19mm fasteners.
• Color-coded dark gray for quick identification of its torque value.
• Manufactured from resilient chrome molybdenum spring steel.
• Protected by a wear and corrosion-resistant powder coating.
• Torque rating and size are permanently roll-stamped on the socket.
• Engineered to absorb excess impact once the target torque is met.
• Suitable for a wide range of automotive wheel installations.