Ammco AMM3000 & 4000 Boot Cross Feed (9030871)

The Ammco AMM3000 & 4000 Boot Cross Feed (9030871) is an essential replacement component designed to protect the critical cross feed mechanism of your Ammco brake lathe. This high-quality boot acts as a crucial barrier, safeguarding delicate internal parts from the harsh workshop environment. In a busy automotive shop, brake lathes are constantly exposed to metal shavings, dust, dirt, oil, and moisture. Without adequate protection, these contaminants can lead to premature wear, corrosion, and diminished performance of your machine. The 9030871 boot ensures that your Ammco 3000, Ammco 4000, and other compatible models, including the 2002, 4100, 7000, 7500, and 7700 series, continue to operate with the precision and reliability you depend on. Made from robust polyethylene, this boot is engineered to resist common workshop chemicals and oils, providing a long-lasting defense. Regular inspection and replacement of this boot are vital for maintaining the accuracy of your brake cuts, extending the lifespan of your lathe, and avoiding costly repairs down the line. Investing in this genuine Ammco part ensures your equipment remains in top working condition, providing consistent, high-quality brake service for your customers.

KEY FEATURES AND BENEFITS:

• Protects Critical Components: Shields the cross feed assembly from damaging elements like dirt, metal shavings, rust, and water, significantly extending the life of your brake lathe.
• Ensures Machine Accuracy: By preventing contamination, the boot helps maintain the precise movement and calibration of the cross feed, leading to accurate and consistent brake resurfacing.
• Broad Compatibility: Specifically designed for Ammco 3000 and Ammco 4000 series brake lathes, it also fits models 2002, 4100, 7000, 7500, and 7700, offering wide applicability.
• Reduces Maintenance Costs: Prevents premature wear and damage to internal parts, thereby minimizing the need for costly repairs and replacement of major components.
• High-Quality Material: Constructed from polyethylene, a material known for its resistance to chemicals and oils, ensuring long-term performance in a workshop environment.
• Easy to Replace: Designed for straightforward installation, allowing technicians to quickly replace a worn or damaged boot with minimal downtime for the machine.

SPECIFICATIONS:

• Manufacturer Part Number: 3087, 9030871
• Cross Reference Part Numbers: SB3087, TMR7087
• Material: Polyethylene
• Included in Product: 1x Ammco 9030871 Boot Cross Feed

HOW TO USE:

1. Safety First: Before starting, ensure your Ammco brake lathe is turned off and unplugged from its power source to prevent accidental startup.
2. Locate the Cross Feed: Identify the cross feed mechanism on your brake lathe. This is typically the part that moves the cutting tools across the rotor or drum.
3. Inspect Existing Boot: Carefully examine the current cross feed boot for any signs of wear, tears, cracks, or excessive accumulation of debris.
4. Remove Old Boot: If the existing boot is damaged or needs replacement, carefully remove it. This may involve gently prying it off or sliding it away from its mounting points. Note how the old boot was oriented for correct installation of the new one.
5. Clean Area: Thoroughly clean the cross feed area to remove any dirt, grease, or metal shavings that may have accumulated underneath or around the old boot.
6. Install New Boot: Carefully position the new Ammco 9030871 Boot Cross Feed over the cross feed mechanism. Ensure it is seated correctly and covers the intended components completely. It should fit snugly to provide effective protection.
7. Verify Fitment: Once installed, gently move the cross feed to ensure the new boot does not impede its movement and remains securely in place.
8. Power On: Plug your brake lathe back in and power it on. Perform a brief test run to confirm everything is functioning correctly.

BENEFITS OF USING AMMCO AMM3000 & 4000 BOOT CROSS FEED (9030871):

• Using the Ammco 9030871 Boot Cross Feed ensures the optimal operation and longevity of your valuable Ammco brake lathe.
• Prevents abrasive materials and liquids from damaging the cross feed mechanism.
• Helps maintain precise tolerances for accurate brake resurfacing.
• Reduces frequency and cost of maintenance and repairs.
• Cost-effective protection that extends the service life of your brake lathe.
• Contributes to consistent, reliable brake service output.

FEATURES:

• Custom-built for the cross feed mechanism of Ammco brake lathes.
• Blocks entry of abrasive particles and contaminants.
• Resists workshop fluids and chemical exposure.
• Designed to fit securely and maintain protection during operation.
• Ensures accurate cuts by preserving cross feed cleanliness.
• Reduces operational noise caused by debris buildup.
• Supports clean, efficient internal movement.
• Helps prevent early component failure from contamination.
• Installs easily as a direct OEM replacement.