-
Description
Details:
The Atlas ST-7000 is the perfect lift for those car enthusiasts lucky enough to have extra tall ceilings and need to store regular height vehicles on top of extra tall vehicles. The Atlas® ST-7000 raises vehicles weighing up to 7,000 lbs. all the way to over 12 feet (144 inches) under the runway.
This super tall four post storage lift uses the same heavy duty runways found on the Atlas Garage Pro-9000. These commercial grade runways have welded jack tracks to accommodate the full line of professional rolling center jacks.
The extra tall lifting height gives customers the space needed to park much taller vehicles under the lifted vehicle. There are 21 locking positions in the lock ladder. The lock ladder may be adjusted during installation so that an almost infinite number of locking heights may be obtained.
A single point release toggle (located next to the power unit) automatically unlocks all four spring loaded pneumatic locks. Compressed air is required to disengage the locks (air supply not included). The emergency slack cable secondary lock system is always “on standby” and will engage automatically if the aircraft cables are compromised or becomes too slack.
Features and Benefits:
- 7,000 lb. Capacity
- Atlas® Powder Coat Finish
- Lifts over 12 feet high!
- Perfect for storing above tall vehicles
- Lock Ladder Design
- Must bolt to ground
- Anchor Bolts Included
- Reinforced runways
- Single Point Pneumatic Lock Release
- Double Lock Safety System
- Emergency secondary locking system
- 2 Year Structural, 1 Year Hydraulic Warranty
- Shipping Weight: 2,866 lbs.
Included
- Steel Approach Ramps
- Anchor bolts
Requirements
- 220V 1-PH 30A
- 75-120 psi air supply for locks
- This lift does have to bolt into place to the floor.
ST-7000 Warranty
- 2-year structural/1-year hydraulic
- Parts Only material and workmanship 90 days on wear items.
Specifications:
Capacity 7,000 LB Lifting Height To Top Of Runway 147″ (12′ 3″) Overall Length with Approach Ramps 227 ½” (18′ 11 ½”) Overall Length without Approach Ramps 205 ¼” (17′ 1 ¼”) Length Between Columns 185″ (15′ 5″) Overall Width (With Motor) 123″ (10′ 3″) Overall Width (Without Motor) 110 ½” (9′ 2 ½”) Approach Ramp Length 31 ½” (2′ 7 ½”) Total Runway Width 19″ Runway Length 194″ (16′ 2″) Runway Thickness 4 ½” Width Between Runways 45″ (3′ 9) Width Between Runway Rails 41 ¾” (3′ 5 ¾”) Outside Runway to Outside Runway 83″ (6′ 11″) Clearance Under Runways 142″ (11′ 10″) Size of Column 7 ½” x 4 ½” Clearance Between Columns 100″ (8′ 4″) Base of the Column 11 ¾” x 13″ Height of Columns 162″ (13′ 6″) Maximum Wheel Base 182″ (15′ 2″) Drive Thru (Outside of tire to outside of tire) 82 ½” (6′ 10 ½”) Adjustable by 7 ½” Cable Diameter .625″ (5/8″) Gauge Of Steel 5 Gauge (.2″ / 1/5″ / 5mm) Motor 220V +/- 5% (209-231volts) 1 phase.
A 30 amp breaker is required.Oil Requirement 6 Gallons AW32/AW46 Shipping Weight 2,866 LBS. -
Customers Also Viewed
-
Review
-
Warning: California's Prop 65
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
-
Non-Affiliation Notice
JB Tools Customer Satisfaction Guarantee: Although JB tools is often not an “authorized” re-seller of all the products it sells and is often not affiliated with the manufacturers or brands of the products it sells, JB Tools stands behind all of the products it sells, because the products JB Tools sells are genuine and authentic. Because JB Tools only sells genuine and authentic products, JB Tools offers its customers a 100% satisfaction guarantee. To ensure 100% customer satisfaction, JB Tools is committed to and strictly complies with its return policy, which offers replacement products to its customers (subject to product availability), or a full refund (less return shipping costs), at the customer’s option, and which you can access by clicking here.
Because JB Tools is an independent re-seller, JB Tools is able to offer the products it sells at the most competitive prices, resulting in substantial cost-savings passed directly to JB Tools’ customers. JB Tools prides itself in being a trusted, internet-based retailer that its customers can rely on for quality products at reasonable prices. JB Tools’ commitment to 100% customer satisfaction is unparalleled, which is why JB Tools offers its customers a best-in-class Warranty Program to all of its customers on all products sold by JB Tools. In the event a JB Tools customer believes that a product purchased from JB Tools has a defective condition and/or malfunctioning issue, JB Tools’ customers can rest assured JB Tools will work with its customers to ensure issues are resolved in accordance with JB Tools’ Warranty Program, which you can access by clicking here.
JB Tools Non-Affiliation Notice and Disclaimer: JB Tools holds itself out as neither the manufacturer, an affiliate of the manufacturer, or an “authorized” distributor of this product. By purchasing this product from JB Tools, purchasers may not be guaranteed any manufacturer-provided services offered by the manufacturer of this product (including any training or technical support that may otherwise be available). By purchasing this product from JB Tools, the manufacturers’ warranty, if any, potentially associated with the product may not be honored by the manufacturer. JB Tools provides this disclaimer to ensure there is no likelihood of confusion unduly influencing your decision to purchase this product, or any other, product from JB Tools, and to ensure there is no confusion as to the existence of any affiliation between JB Tools and the manufacturer of this product. However, JB Tools’ customers can rest assured that JB Tools stands behind its Warranty Program and its Manufacturer Matching Policy,100% of the time. Furthermore, in connection with JB Tools’ satisfaction guarantee, JB Tools matches the price and/or any promotion associated with its products.
This item can only be shipped within the 48 contiguous United States via ground shipping. Unfortunately, we cannot ship it via air or to Alaska, Hawaii, or international locations.