Shop CTA Tools

CTA Tools 2365 3-Valve Ford Triton Spark Plug Extractor Kit

$102.35 Save 25
$81.88
(You save $20.47 )
Adding to cart… The item has been added
MPN:   
2365  |
SKU:   
JB-DS-CTA-2365  |
UPC:   
053001023653  |
Availability:
IN STOCK  |
Shipping:
Calculated at Checkout  
  • Icon 1 Free
    shipping
    Orders Over $99
  • Icon 2 Global
    Shipping
    Fast delivery
  • Icon 3 60-Day
    Return
    Hassle-free
  • Description

    CTA Tools 2365 3-Valve Ford Triton Spark Plug Extractor Kit

    • Extracts broken-off spark plug sleeves in ’04 – ’08 (4.6, 5.4 & 6.8 engines)
    • Includes:
      • 8”/20cm high-speed steel tap
      • Extractor
      • Guide
      • Washer
      • Jam nut and rubber caps to prevent thread chips from entering cylinder bore
    • May be used with #2364.
    • MADE IN USA

    The spark plug will break in 1 of 2 modes:

    Mode 1: The ground electrode shield is left behind as an empty shell.

    Mode 2: The porcelain center and ground electrode shield is left behind. In this case, soak with penetrating oil and use long reach needle nose pliers to firmly grasp and remove the porcelain center from the ground electrode shield.

    Removal Instructions:

    1. Seat the stopper cap using a long drill bit or suitable wire sized for the internal diameter of the cap. Make sure the cap is bottomed out against the electrode strap. This will prevent thread shavings from entering cylinder bore.
    2. Place the guide into the spark plug well.

    WARNING: DO NOT USE AIR OR POWERED TOOLS FOR PLUG REMOVAL

    1. Coat the end of the tap with general purpose grease and slowly insert the tap through the guide and carefully tap the ground electrode shield. Turn and tap 3 to 4 threads into the ground electrode shield. Be sure to tap slowly and back up tap frequently to break up chips and prevent cut material from coiling up and jamming inside electrode shield.

    CAUTION: DO NOT ATTEMPT TO REMOVE THE GROUND ELECTRODE SHIELD WITH THE TAP. THE TAP MAY BREAK IF ATTEMPTED.

    1. Once the ground electrode is tapped, insert the extractor through the guide and thread into the ground electrode shield. Place nylon washer and jam nut onto threaded shaft.
    2. While holding hex end of extractor with wrench, turn jam nut with another wrench to remove ground electrode shield.
  • Customers Also Viewed
  • Review
  • Warning: California's Prop 65

    Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • Non-Affiliation Notice

    JB Tools Customer Satisfaction Guarantee: Although JB tools is often not an “authorized” re-seller of all the products it sells and is often not affiliated with the manufacturers or brands of the products it sells, JB Tools stands behind all of the products it sells, because the products JB Tools sells are genuine and authentic. Because JB Tools only sells genuine and authentic products, JB Tools offers its customers a 100% satisfaction guarantee. To ensure 100% customer satisfaction, JB Tools is committed to and strictly complies with its return policy, which offers replacement products to its customers (subject to product availability), or a full refund (less return shipping costs), at the customer’s option, and which you can access by clicking here.

    Because JB Tools is an independent re-seller, JB Tools is able to offer the products it sells at the most competitive prices, resulting in substantial cost-savings passed directly to JB Tools’ customers. JB Tools prides itself in being a trusted, internet-based retailer that its customers can rely on for quality products at reasonable prices. JB Tools’ commitment to 100% customer satisfaction is unparalleled, which is why JB Tools offers its customers a best-in-class Warranty Program to all of its customers on all products sold by JB Tools. In the event a JB Tools customer believes that a product purchased from JB Tools has a defective condition and/or malfunctioning issue, JB Tools’ customers can rest assured JB Tools will work with its customers to ensure issues are resolved in accordance with JB Tools’ Warranty Program, which you can access by clicking here.

    JB Tools Non-Affiliation Notice and Disclaimer: JB Tools holds itself out as neither the manufacturer, an affiliate of the manufacturer, or an “authorized” distributor of this product. By purchasing this product from JB Tools, purchasers may not be guaranteed any manufacturer-provided services offered by the manufacturer of this product (including any training or technical support that may otherwise be available). By purchasing this product from JB Tools, the manufacturers’ warranty, if any, potentially associated with the product may not be honored by the manufacturer. JB Tools provides this disclaimer to ensure there is no likelihood of confusion unduly influencing your decision to purchase this product, or any other, product from JB Tools, and to ensure there is no confusion as to the existence of any affiliation between JB Tools and the manufacturer of this product. However, JB Tools’ customers can rest assured that JB Tools stands behind its Warranty Program and its Manufacturer Matching Policy,100% of the time. Furthermore, in connection with JB Tools’ satisfaction guarantee, JB Tools matches the price and/or any promotion associated with its products.