Shop CTA Tools

CTA Tools 3440 Ford Fuel Injection Tester

$88.42 Save 25
$70.73
(You save $17.69 )
Adding to cart… The item has been added
MPN:   
3440  |
SKU:   
JB-DS-CTA-3440  |
UPC:   
053001034406  |
Availability:
IN STOCK  |
Shipping:
Calculated at Checkout  
  • Icon 1 Free
    shipping
    Orders Over $99
  • Icon 2 Global
    Shipping
    Fast delivery
  • Icon 3 60-Day
    Return
    Hassle-free
  • Description

    CTA Tools 3440 Ford Fuel Injection Tester

    • Test vehicles with Multi-port and TBI systems
    • Features 3-1/2" (90mm) gauge with dual calibration (5-145 PSI / 25-1,000 kPa) and 3 hose assemblies
    • MADE IN USA
    • Included components:
      • 3440X01 - Ford Schrader Hose
      • 3440X02 - Hair Pin Hose Assymbly
      • 3440X03 - Spring Lock Hose Assymbly
      • 3440X04 - Gauge
      • 3440X05 - Adapter w/ Viton O-Ring (Quick-Connect)

    INSTRUCTION: (set-up)

    1. Review pre-test information. (Below)
    2. For systems with a Schrader valve connection on fuel rail-connect the Schrader valve hose connector to the gauge assembly, and attach to the fuel rail. Hand tighten only.
    3. If there is no Schrader valve, disabled the fuel pump by disconnecting the inertia switch located in the trunk or left quarter panel.
    4. Disconnect the fuel line, using a rag around the connections to avoid spilling fuel. Insert the correct adapter in line and attach to test gauge assembly.
    5. Re-activate the fuel pump, start engine and observe pressure.

    IMPORTANT PRE-TEST INFORMATION

    ALWAYS:

    • Check a reliable shop manual or the vehicles manufacture for proper test procedures, access points, and pressure specs.
    • Wear safety goggles when working on fuel systems.
    • Keep clothing and tools away from moving or hot engine parts.
    • Wrap a rag around fittings when connecting or disconnecting to prevent fuel spills.
    • Provide proper ventilation for gasoline fumes.
    • Make sure battery is fully charged.

    NEVER:

    • Smoke, or work near sparks or open flames when working on fuel systems.
    • Allow fuel to spill on hot engines. If a leak or spill develops, turn off ignition, disable fuel pump and clean up spill immediately.
  • Customers Also Viewed
  • Review
  • Warning: California's Prop 65

    Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • Non-Affiliation Notice

    JB Tools Customer Satisfaction Guarantee: Although JB tools is often not an “authorized” re-seller of all the products it sells and is often not affiliated with the manufacturers or brands of the products it sells, JB Tools stands behind all of the products it sells, because the products JB Tools sells are genuine and authentic. Because JB Tools only sells genuine and authentic products, JB Tools offers its customers a 100% satisfaction guarantee. To ensure 100% customer satisfaction, JB Tools is committed to and strictly complies with its return policy, which offers replacement products to its customers (subject to product availability), or a full refund (less return shipping costs), at the customer’s option, and which you can access by clicking here.

    Because JB Tools is an independent re-seller, JB Tools is able to offer the products it sells at the most competitive prices, resulting in substantial cost-savings passed directly to JB Tools’ customers. JB Tools prides itself in being a trusted, internet-based retailer that its customers can rely on for quality products at reasonable prices. JB Tools’ commitment to 100% customer satisfaction is unparalleled, which is why JB Tools offers its customers a best-in-class Warranty Program to all of its customers on all products sold by JB Tools. In the event a JB Tools customer believes that a product purchased from JB Tools has a defective condition and/or malfunctioning issue, JB Tools’ customers can rest assured JB Tools will work with its customers to ensure issues are resolved in accordance with JB Tools’ Warranty Program, which you can access by clicking here.

    JB Tools Non-Affiliation Notice and Disclaimer: JB Tools holds itself out as neither the manufacturer, an affiliate of the manufacturer, or an “authorized” distributor of this product. By purchasing this product from JB Tools, purchasers may not be guaranteed any manufacturer-provided services offered by the manufacturer of this product (including any training or technical support that may otherwise be available). By purchasing this product from JB Tools, the manufacturers’ warranty, if any, potentially associated with the product may not be honored by the manufacturer. JB Tools provides this disclaimer to ensure there is no likelihood of confusion unduly influencing your decision to purchase this product, or any other, product from JB Tools, and to ensure there is no confusion as to the existence of any affiliation between JB Tools and the manufacturer of this product. However, JB Tools’ customers can rest assured that JB Tools stands behind its Warranty Program and its Manufacturer Matching Policy,100% of the time. Furthermore, in connection with JB Tools’ satisfaction guarantee, JB Tools matches the price and/or any promotion associated with its products.