Iwata W400LV-184G 1.8mm Gravity Fed Spray Gun Only (4770)

The Iwata W400LV-184G 1.8mm Gravity Fed Spray Gun Only (4770) is engineered for precise and efficient application of coatings, particularly primers and high-viscosity materials. This conventional, center post gravity-fed spray gun integrates Iwata's advanced LV Technology with a High-TEC standard, designed to provide excellent transfer efficiency and superior atomization. Users can expect uniform material distribution and consistent results due to its carefully designed spray pattern.

KEY FEATURES AND BENEFITS:

• Gravity Fed Design: The paint cup is positioned above the gun, utilizing gravity for a consistent material flow to the nozzle, simplifying operation.
• LV Technology with High-TEC Standard: This combination ensures a high percentage of material reaches the target surface, reducing waste and overspray, while producing a finely atomized spray.
• Optimized for Primers and High Viscosity Materials: The 1.8mm nozzle diameter is specifically suited for applying thicker coatings, making it an effective tool for base layers and heavier materials.
• Consistent Pattern Width: Delivers a stable 12.8-inch pattern, allowing for even and reliable coverage across various surfaces.
• Efficient Air Consumption: Operates effectively at 20 PSI with 10.0 CFM air consumption, making it compatible with a range of air compressors.

SPECIFICATIONS:

• Nozzle Size: 1.8 mm
• Pattern Width: 12.8 inches
• Recommended PSI: 20
• Air Consumption (CFM): 10.0
• Included in product: Iwata W400LV-184G Spray Gun Only (4770)

HOW TO USE:

1. Prepare Material: Mix your primer or high-viscosity coating according to the manufacturer's recommendations. Ensure it is strained to prevent clogs.
2. Fill Cup: Pour the prepared material into the gravity-fed cup attached to the spray gun.
3. Connect Air Supply: Attach an air hose from your compressor to the spray gun's air inlet. Ensure your air compressor is capable of providing 20 PSI at 10.0 CFM.
4. Adjust Settings: Set your air pressure regulator to 20 PSI. If available, adjust the fluid control knob and fan pattern knob to achieve your desired spray pattern and material flow on a test surface.
5. Test Spray: Before applying to your main project, test the spray pattern and material atomization on a piece of scrap material to ensure optimal settings.
6. Apply Coating: Maintain a consistent distance from the surface, typically 6-8 inches, and use overlapping passes for even coverage. Release the trigger at the end of each pass.
7. Clean After Use: Immediately after painting, thoroughly clean the spray gun by flushing it with appropriate cleaning solvents to prevent material from drying inside.

BENEFITS OF USING IWATA W400LV-184G 1.8MM GRAVITY FED SPRAY GUN ONLY (4770):

• Achieves smooth, high-quality finishes: Due to its advanced atomization capabilities.
• Reduces material waste: Through high transfer efficiency, saving on coating costs.
• Provides consistent application: Leading to fewer rework opportunities.
• Designed for straightforward operation: Suitable for professionals and experienced users.
• Reliable performance: For critical base coat and heavy material applications.
• Easy to maintain: Due to its design, promoting longevity of the tool.

FEATURES:

• Center post gravity feed design for stable fluid delivery.
• Conventional spray gun type, optimized for specific coating tasks.
• Precise 1.8 mm nozzle diameter for managing thicker paints and primers.
• Manufactured with robust materials for consistent performance.
• Ergonomic design for comfortable handling during extended use.
• Designed for compliance with relevant coating application standards.