Phoenix USA Hub Cover Rear 10 Lug 285mm (PH0129)

The Phoenix USA Hub Cover Rear 10 Lug 285mm (PH0129) is a practical and reliable accessory designed to protect the rear wheel hubs of your trucks, trailers, and RVs. Engineered for vehicles with a 10-lug bolt pattern and a 285mm (11.25 inch) bolt circle, this hub cover offers a combination of protection and convenience. Constructed from durable materials, typically polished stainless steel or robust ABS plastic, it is built to withstand the rigors of the road, shielding your wheel hubs from dirt, moisture, salt, and other potentially damaging elements. Beyond its protective function, the hub cover also provides a clean and finished aesthetic to your vehicle's wheels. A key feature of this model is its integrated pop-out center cap, which allows for easy access to the wheel hub for essential maintenance tasks, such as lubricating wheel bearings, without the need to completely remove the entire cover. This thoughtful design saves time and effort, making routine maintenance more straightforward. Sold as a single unit, the Phoenix USA Rear Hub Cover is a valuable addition for maintaining the longevity and appearance of your vehicle's wheels.

KEY FEATURES AND BENEFITS:

• Rear Wheel Specific: Designed exclusively for rear wheels with a 10-lug configuration.
• Precise Fit: Engineered to perfectly match a 285mm (11.25 inch) bolt circle, ensuring secure and proper installation.
• Protective Barrier: Effectively shields the wheel hub assembly from dirt, water, road salt, and other corrosive substances, helping to prevent premature wear and tear.
• Easy Maintenance Access: Features a convenient pop-out center cap that allows quick and easy access to the hub for maintenance procedures without full removal.
• Enhanced Appearance: Provides a clean, polished look to the wheels, improving the overall aesthetic of the vehicle.
• Durable Construction: Typically made from high-quality stainless steel or strong ABS plastic for long-lasting performance and resistance to environmental factors.
• Simple Installation: Generally designed for a straightforward clip-mount installation, utilizing existing spring clips on the wheel hub for a secure fit.

SPECIFICATIONS:

• Product Name: Phoenix USA Hub Cover Rear 10 Lug 285mm
• Part Number: PH0129
• Position: Rear
• Lug Count: 10
• Bolt Circle Diameter: 285 mm (11.25 inches)
• Material: Typically Polished Stainless Steel or ABS Plastic
• Center Cap: Pop-Out
• Mounting Type: Clip-Mount (may vary slightly)
• Hub Diameter (approximate): 8-1/4 inches
• Overall Diameter (approximate): 9-1/8 inches
• Overall Height (approximate): 9 inches
• Compatibility: Designed for trucks, trailers, and RVs with rear wheels featuring a 10-lug pattern and a 285mm (11.25 inch) bolt circle.

HOW TO USE:

• Preparation: Ensure the wheel hub is clean and free of any loose debris or dirt.
• Alignment: Position the hub cover over the wheel hub, aligning it with the existing spring clips or mounting points.
• Attachment (Clip-Mount): Gently push the hub cover onto the hub. The internal spring clips on the hub cover will engage with the corresponding features on the wheel hub, securing the cover in place. Apply even pressure around the edges of the cover until it is firmly seated.
• Attachment (Top Hole Mount - if applicable): Some models may have a top hole. Align this hole with the corresponding mounting point on the hub and secure it with the appropriate fastener (if included or already present). Then, proceed with clipping the rest of the cover into place.
• Pop-Out Center Access: To access the wheel hub for maintenance, locate the pop-out center cap. Gently push or pry (depending on the design) the center cap to remove it, providing access to the grease fitting or hub components. Once maintenance is complete, firmly press the center cap back into place until it is secure.

BENEFITS OF USING THE PHOENIX USA HUB COVER REAR 10 LUG 285MM (PH0129):

• Utilizing the Phoenix USA Hub Cover Rear 10 Lug 285mm offers several key advantages for vehicle owners and operators. Firstly, it provides a significant layer of protection to the crucial wheel hub assembly. By acting as a barrier against road debris, moisture, and corrosive elements like salt, the hub cover helps to extend the lifespan of the wheel bearings, seals, and other hub components. This protection can lead to reduced maintenance costs and fewer unexpected repairs over time.
• Secondly, the inclusion of a pop-out center cap greatly simplifies routine maintenance. The ability to access the hub for greasing and inspection without the need for complete cover removal saves valuable time and effort.
• Furthermore, the hub cover contributes to the overall appearance of the vehicle. Its polished finish enhances the look of the wheels, providing a cleaner and more professional aesthetic.
• Finally, the secure fit ensured by its design for a specific 10-lug, 285mm bolt circle means reliable protection and a lasting enhancement to your vehicle.

FEATURES:

• Polished Surface: Constructed with a polished surface for a refined appearance.
• Rear Axle Applications: Engineered specifically for rear axle applications.
• Precise Fit: Designed to fit precisely onto 10-lug wheel configurations.
• Bolt Circle Match: Matches a 285mm (11.25 inch) bolt circle diameter.
• Removable Center Section: Incorporates a removable center section for convenient hub access.
• Contaminant Protection: Helps to keep the wheel hub free from external contaminants.
• Durable Shield: Offers a durable shield against the elements.
• Finished Look: Provides a finished look to the vehicle's wheels.
• Easy Installation: Designed for relatively easy installation using existing hub clips.
• Preservation of Components: Contributes to the preservation of wheel hub components.