Race Ramps Set of Two Scale Ramps (RR-SCALE-2)

Race Ramps Set of Two Scale Ramps (RR-SCALE-2) offers an efficient solution for positioning vehicles onto racing scales. This pair of ramps eliminates the need for a jack, allowing you to simply drive your car directly onto the scales. Each ramp provides 2.5 inches of consistent lift, perfectly matching the height of most standard racing scales. Their low 7.8-degree approach angle ensures that even vehicles with very low ground clearance or front splitters can easily ascend without scraping. Constructed from 100% solid, high-density expanded polystyrene (EPS) foam, these ramps are incredibly lightweight at just 3 pounds each, making them exceptionally easy to move, transport, and store. Despite their light weight, they are remarkably strong, with each ramp supporting up to 1,500 pounds, for a total vehicle capacity of 6,000 pounds when using the pair. The ramps feature a rugged, anti-slip polyurea coating that ensures they remain stable on any surface—including smooth garage or workshop floors—without sliding or causing damage. The integrated 12.5-inch roll-off platform assists with precise wheel placement on the scales and helps to release any side bind in the suspension for more accurate readings. These ramps are an invaluable tool for automotive enthusiasts, professional race teams, and auto shops seeking a reliable and convenient method for accurate vehicle weight distribution.

KEY FEATURES AND BENEFITS:

• Time-Saving Setup: Eliminates the need for a jack, allowing quick and easy vehicle setup.
• Accurate Tire Placement: 12.5-inch roll-off platform aids in precise wheel alignment and releases suspension bind.
• Low-Clearance Friendly: 7.8-degree approach angle is ideal for vehicles with low ground clearance or front splitters.
• Lightweight and Strong: Weighing just 3 pounds per ramp yet supporting up to 1,500 pounds each.
• Slip-Resistant Coating: Polyurea coating keeps ramps firmly in place on all surfaces.
• Floor-Safe Design: Will not scratch, scuff, or mark garage and shop floors.

SPECIFICATIONS:

• Model Number: RR-SCALE-2
• Sold As: Pair
• Length: 30 inches
• Width: 12 inches
• Height: 2.5 inches
• Weight (per ramp): 3 lbs.
• Lift Height: 2.5 inches
• Maximum Capacity (per ramp): 1,500 lbs.
• Total Vehicle Capacity (pair): 6,000 lbs.
• Maximum Tire Width: 10 inches
• Approach Angle Degree: 7.8°
• Material: Expanded foam with traction coating
• Platform Length: 12.5 inches
• Color: Black
• What is Included in the Product When Purchased/Shipped: One (1) set containing two (2) Race Ramps Scale Ramps (RR-SCALE-2).

HOW TO USE:

1. Inspect Ramps: Before each use, visually inspect both Race Ramps to ensure they are free of any damage. Do not use damaged ramps.
2. Prepare Surface: Place the ramps on a flat, level, and stable surface such as a garage floor or workshop area. Ensure the entire base of each ramp makes full contact with the ground.
3. Position Ramps: Place one ramp in front of each tire (front or rear, depending on which axle you are weighing or working on). Ensure the ramps are directly in line with the vehicle's tires. Never use both ramps on the same side of the vehicle.
4. Align Vehicle: Straighten your vehicle's steering wheel to ensure the tires are pointing directly forward.
5. Drive On: Slowly and steadily drive your vehicle forward onto the ramps. Maintain a slow, consistent speed.
6. Position on Scales (if applicable): Guide the vehicle so that each tire rests precisely on the 12.5-inch roll-off platform of the ramps, which is designed to sit directly on your racing scales. This platform helps release any side bind for more accurate weight readings.
7. Drive Off: When finished, slowly and steadily drive the vehicle backward off the ramps.

BENEFITS OF USING RACE RAMPS SET OF TWO SCALE RAMPS (RR-SCALE-2):

• Time-Saving Setup: Eliminates the need for a floor jack or complex lifting equipment, significantly speeding up the process of getting a vehicle onto scales.
• Improved Accuracy: The 12.5-inch roll-off platform allows for precise tire placement on scales and helps to release suspension bind, contributing to more accurate weight distribution measurements.
• Vehicle Protection: The low approach angle protects low-profile vehicles, including those with front splitters, from scraping or damaging their undercarriage when driving onto the ramps.
• Floor Protection: The anti-slip polyurea coating and foam construction prevent the ramps from sliding on smooth surfaces and will not scratch or mar delicate garage or workshop floors.
• Portability and Storage: Being exceptionally lightweight, these ramps are easy to transport to track days, events, or between different work areas, and they require minimal storage space.
• Stability and Safety: The robust, anti-slip coating ensures the ramps remain stable under the vehicle, providing a secure platform for scale setup.
• Versatility: While ideal for racing scales, they can also provide a small, safe lift for general maintenance tasks on low-clearance vehicles.

FEATURES:

• Foam Construction: 100% solid, high-density expanded polystyrene (EPS) foam construction
• Non-Slip Surface: Anti-slip polyurea coating
• Fluid Resistance: Resistant to water and most automotive fluids
• Stability on Smooth Surfaces: Will not slide on concrete or other smooth surfaces
• Scratch-Free: Will not scratch or mar floors
• Tire Compatibility: Supports tires up to 10 inches wide
• Patented Manufacturing: Manufactured using an exclusive, patented process
• Origin: Made in the USA