-
Description
- 300 lumens and 2.5 hour runtime
- Red aiming laser 610-640nm class IIIr rated for long range targeting
- Accepts two non-rechargeable CR123A lithium batteries for optimal performance
- Ambidextrous on/off switch
- Securely fits a broad range of weapons; verify compatibility prior to purchase; rail grip clamp system securely attaches quickly and safely with no tools
- Brightness 300 Lumens
- Material Aluminum
- Dimensions 3.39"D x 1.47"W x 1.83"H
- Mounting Type - GLOCK style rails and to all MIL-STD-1913 (Picatinny) rails; Refer to compatibility prior to purchase
- Recomended uses for product - Tactical, Hunting, Home Defense, Personal Safety
STREAMLIGHT 69120 TLR-2 STROBING TACTICAL LIGHT COMPATIBILITY LIST:
Beretta:
90two- 90two key.
Cx4 Storm (carbine/rifle)- 1913 key.
Px4 Storm (pistol) - GL (Standard) key. note: M-lights are very loose.
Vertec - New polymer key- 1913; Older aluminum key – GL (Standard) Key.
CZ: P-01 - Should work with GL (Standard) key. (Not tested; based on similar European version).
FN: 5.7 (with Picatinny style rail) -1913 key.
Glocks: Any with rails – GL (Standard) key. Cannot fit Glocks that are not equipped with factory rails.
HK:
USP (full size only) - use HK adapter 69085 with a GL (Standard) key. Compact size - use HK adapter 69091 with a GL (Standard) key.
HK P2000 (new) is supposed to have Picatinny rail.
HK P30 -1913 key.
Note: The rail tilts down slightly from the bore. This may result in laser zeroing difficulty closer than 50 feet (depending on the tolerances of the pistol and laser).
Kimber: TLE RLII (1911 with rail) - Picatinny key.
Ruger:
KP345 - GL (Standard) key.
SR-9 - GL (Standard) key.
Sig Sauer:
GSR or 1911 Style with flat bottom rail - Picatinny key.
Any aluminum frame SIG with a round bottom rail, including the P220R, P229R, etc.: The Sig round bottom rail departs from the true shape of both the 1913 and Universal standards and may cause an improper fit. The TLR will work with the 1913 key but there will be damage to the finish of both the gun and the light. The retaining fastener must be tight.
Newer Sig P series guns are supposed to have a true Picatinny rail. This has not been verified by Streamlight.
SP2022 (Polymer frame): Same comments as for aluminum frames, except that the polymer frame is a little thicker and does not show marks from a clamp. Per SIG, use the 1913 key.
Smith & Wesson:
TSW and 99: the slot is too far back for the standard key and requires the special S&W key. There are many different models of TSW, but if it's a TSW with a rail, it uses the S&W key.
M&P Autoloader - Picatinny key.
Sigma - Cannot fit.
Springfield Armory:
Operator (1911 with rail) - Picatinny key.
XD (4 & 5-inch barrels) - GL (Standard) key. Cannot fit 3inch barrel.
Walther:
99 (New 2004 models): full size ones are nearly the same as the S&W 99 and use the S&W key. Older ones (no slot across the rail and the side grooves closed in front) cannot be fitted with a TLR.
99 Compact – Cannot fit. Rail is too short.
P22 – Cannot fit. Non-standard rail.
-
Customers Also Viewed
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
JB Tools Customer Satisfaction Guarantee: Although JB tools is often not an “authorized” re-seller of all the products it sells and is often not affiliated with the manufacturers or brands of the products it sells, JB Tools stands behind all of the products it sells, because the products JB Tools sells are genuine and authentic. Because JB Tools only sells genuine and authentic products, JB Tools offers its customers a 100% satisfaction guarantee. To ensure 100% customer satisfaction, JB Tools is committed to and strictly complies with its return policy, which offers replacement products to its customers (subject to product availability), or a full refund (less return shipping costs), at the customer’s option, and which you can access by clicking here.
Because JB Tools is an independent re-seller, JB Tools is able to offer the products it sells at the most competitive prices, resulting in substantial cost-savings passed directly to JB Tools’ customers. JB Tools prides itself in being a trusted, internet-based retailer that its customers can rely on for quality products at reasonable prices. JB Tools’ commitment to 100% customer satisfaction is unparalleled, which is why JB Tools offers its customers a best-in-class Warranty Program to all of its customers on all products sold by JB Tools. In the event a JB Tools customer believes that a product purchased from JB Tools has a defective condition and/or malfunctioning issue, JB Tools’ customers can rest assured JB Tools will work with its customers to ensure issues are resolved in accordance with JB Tools’ Warranty Program, which you can access by clicking here.
JB Tools Non-Affiliation Notice and Disclaimer: JB Tools holds itself out as neither the manufacturer, an affiliate of the manufacturer, or an “authorized” distributor of this product. By purchasing this product from JB Tools, purchasers may not be guaranteed any manufacturer-provided services offered by the manufacturer of this product (including any training or technical support that may otherwise be available). By purchasing this product from JB Tools, the manufacturers’ warranty, if any, potentially associated with the product may not be honored by the manufacturer. JB Tools provides this disclaimer to ensure there is no likelihood of confusion unduly influencing your decision to purchase this product, or any other, product from JB Tools, and to ensure there is no confusion as to the existence of any affiliation between JB Tools and the manufacturer of this product. However, JB Tools’ customers can rest assured that JB Tools stands behind its Warranty Program and its Manufacturer Matching Policy,100% of the time. Furthermore, in connection with JB Tools’ satisfaction guarantee, JB Tools matches the price and/or any promotion associated with its products.