-
Description
Titan Tools 41185 90 Amp Gasless Wire Feed Welder
The 41185 Titan 90amp Gasless Wire Feed Welder is an easy-to-use gasless flux-core wire welder for the beginner, perfect for light duty repairs, maintenance and fabrication on light gauge steel around home, workshop and garage. Welds up to 1/8" thick mild steel but is not suitable for aluminum. Operates on 120V single-phase power with an Amperage range of 60 - 90 amps. Uses 0.030" to 0.035" diameter flux-core wire. Thermal overload protector automatically shuts off welder when duty cycle is exceeded. Fan cooled for better performance. One year limited warranty. Includes: Welding shield, welding hammer/brush, sample spool of flux-core wire, cold contractor MIG torch for added safety, earth clamp and welding cable.
The VAPER flux wire welder is designed for use on standard 120V household current. It is equipped with a two step output power (amperage) control to select the proper current for various welding conditions. Internal components are thermostatically protected. This VAPER welder can weld steel ranging from 14 gauge up to 1/8” thick in a single pass. The unit is setup for 0.030” (0.8 mm) fl ux core welding wire when it leaves the factory.
ELECTRICAL REQUIREMENTS
This equipment requires a dedicated 120 volt 20 amp circuit equipped with a similarly rated circuit breaker or slow blow fuse. DO NOT run other appliances, lights, tools or equipment while operating this welder. EXTENSION CORDS ARE NOT RECOMMENDED for use with this welder.- Easy-to-use gasless flux-core wire welder for the beginner
- Perfect for light duty repairs, maintenance and fabrication on light gauge steel around home, workshop and garage
- Welds up to 1/8" thick mild steel - not suitable for aluminum
- Operates on 120V single-phase power
- Amperage range: 60 - 90 amps
- Uses 0.030" to 0.035" diameter flux-core wire
- Thermal overload protector automatically shuts off welder when duty cycle is exceeded
- Fan cooled for better performance
- One year limited warranty
Specifications:
- Type: 90 Amp gasless flux-core wire welder
- Input Voltage: 120 Volt (1~60Hz)
- Rated Output: 90 Amps @ 10% Duty Cycle
- Output Power Settings: Switchable high/low adjustment
- Output Current: 63.6 Amps - Low power output setting / 20% Duty cycle
- 90 Amps - High power output setting / 10% Duty cycle
- Maximum Output Voltage: 32VAC
- Power Switch: Illuminated On/Off Switch
- Power Cord: 6 Ft 15 Amp Power Plug
- Ground Cable & Clamp: 4.9 Ft Ground Cable with Clamp
- Ground Cable Connection: Fixed Connection
- Welding Cable: 6 Ft Wire feed welding cable
- Welding Wire: Uses flux-core welding wire 0.030” (0.8mm) or 0.035” (0.9mm) in diameter
-
Customers Also Viewed
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
JB Tools Customer Satisfaction Guarantee: Although JB tools is often not an “authorized” re-seller of all the products it sells and is often not affiliated with the manufacturers or brands of the products it sells, JB Tools stands behind all of the products it sells, because the products JB Tools sells are genuine and authentic. Because JB Tools only sells genuine and authentic products, JB Tools offers its customers a 100% satisfaction guarantee. To ensure 100% customer satisfaction, JB Tools is committed to and strictly complies with its return policy, which offers replacement products to its customers (subject to product availability), or a full refund (less return shipping costs), at the customer’s option, and which you can access by clicking here.
Because JB Tools is an independent re-seller, JB Tools is able to offer the products it sells at the most competitive prices, resulting in substantial cost-savings passed directly to JB Tools’ customers. JB Tools prides itself in being a trusted, internet-based retailer that its customers can rely on for quality products at reasonable prices. JB Tools’ commitment to 100% customer satisfaction is unparalleled, which is why JB Tools offers its customers a best-in-class Warranty Program to all of its customers on all products sold by JB Tools. In the event a JB Tools customer believes that a product purchased from JB Tools has a defective condition and/or malfunctioning issue, JB Tools’ customers can rest assured JB Tools will work with its customers to ensure issues are resolved in accordance with JB Tools’ Warranty Program, which you can access by clicking here.
JB Tools Non-Affiliation Notice and Disclaimer: JB Tools holds itself out as neither the manufacturer, an affiliate of the manufacturer, or an “authorized” distributor of this product. By purchasing this product from JB Tools, purchasers may not be guaranteed any manufacturer-provided services offered by the manufacturer of this product (including any training or technical support that may otherwise be available). By purchasing this product from JB Tools, the manufacturers’ warranty, if any, potentially associated with the product may not be honored by the manufacturer. JB Tools provides this disclaimer to ensure there is no likelihood of confusion unduly influencing your decision to purchase this product, or any other, product from JB Tools, and to ensure there is no confusion as to the existence of any affiliation between JB Tools and the manufacturer of this product. However, JB Tools’ customers can rest assured that JB Tools stands behind its Warranty Program and its Manufacturer Matching Policy,100% of the time. Furthermore, in connection with JB Tools’ satisfaction guarantee, JB Tools matches the price and/or any promotion associated with its products.